• Code: SC864-01
• Description: HDD data CRC error During HDD operation, the HDD returned a CRC error.
• Causes: Bad sectors were generated during operation. (An error occurred in an area that does not belong to a partition, such as the disklabel area.)
• Remedy: • Format the HDD. • Replace the HDD.

• Code: SC864-02 ... SC864-23
• Description: HDD data CRC error During HDD operation, the HDD returned a CRC error.
• Causes: Bad sectors were generated during operation. (An error occurred in partition "a".)
• Remedy: • Format the HDD. • Replace the HDD.

• Code: SC865-00
• Description: HDD access error During HDD operation, the HDD returned an error.
• Causes: The HDD returned an error that does not constitute SC863 (bad sector) or SC864 (CRC error).
• Remedy: Replace the HDD.

• Code: SC865-01 ... SC865-23
• Description: HDD access error During HDD operation, the HDD returned an error.
• Causes: The HDD returned an error that does not constitute SC863 (bad sector) or SC864 (CRC error). (An error occurred in an area that does not belong to a partition, such as the disklabel area.)
• Remedy: Replace the HDD.

• Code: SC866-00
• Description: SD card authentication error A license error of an application that is started from the SD card was detected.
• Causes: Invalid program data is stored on the SD card.
• Remedy: Store a valid program data on the SD card.

• Code: SC867-00
• Description: SD card removed The SD card that starts an application was removed from the slot.
• Causes: The SD card that starts an application was removed from the slot (mount point of /mnt/sd0).
• Remedy: Turn the main power off/on.

• Code: SC867-01
• Description: SD card removed The SD card that starts an application was removed from the slot.
• Causes: The SD card that starts an application was removed from the slot (mount point of /mnt/sd1).
• Remedy: Turn the main power off/on.

• Code: SC867-02
• Description: SD card removed The SD card that starts an application was removed from the slot.
• Causes: The SD card that starts an application was removed from the slot (mount point of /mnt/sd2).
• Remedy: Turn the main power off/on.