Code :

Code: SC876-02
Description: Log Data Error 2. An error was detected in the handling of the log data at power on or during machine operation.
Causes: Log encryption is enabled but encryption module is not installed.
Remedy: • Replace or set again the encryption module. • Disable the log encryption setting.

Code: SC876-03
Description: Log Data Error 3 An error was detected in the handling of the log data at power on or during machine operation.
Causes: Inconsistency of encryption key between NV-RAM and HDD.
Remedy: • Disable the log encryption setting. • Initialize LCS memory (SP5801-019). • Initialize the HDD (SP5-832-004).

Code: SC876-04
Description: Log Data Error 4 An error was detected in the handling of the log data at power on or during machine operation.
Causes: • Log encryption key is disabled but the log data file is encrypted. (NVRAM data corruption) • Log encryption key is enabled but the log data file is not encrypted. (NVRAM data corruption)
Remedy: Initialize the HDD (SP5-832-004).

Code: SC876-05
Description: Log Data Error 5 An error was detected in the handling of the log data at power on or during machine operation.
Causes: • Only the NV-RAM has been replaced with one previously used in another machine. • Only the HDD has been replaced with one previously used in another machine.
Remedy: • Attach the original NV-RAM. • Attach the original HDD. • With the configuration that caused the SC, initialize the HDD (SP5-832-004).

Code: SC876-99
Description: Log Data Error 99 An error was detected in the handling of the log data at power on or during machine operation.
Causes: Other causes
Remedy:

Code: SC877-00
Description: Data Overwrite Security card error The "Auto Erase Memory" function of the Data Overwrite Security is set to on but it cannot be done.
Causes: • Data Overwrite Security option SD card is broken. • Data Overwrite Security option SD card has been removed.
Remedy: • If the SD card is broken, prepare a new Data Overwrite Security option SD card and replace the NVRAM. • If the SD card has been removed, turn the main power off and reinstall a working Data Overwrite Security option SD card.

Code: SC878-00
Description: TPM electronic authentication error The machine failed TPM electronic authentication. System hash registered in the TPM did not match the data on the USB flash.
Causes: • System module was updated in an unauthorized manner. • USB flash is not working correctly.
Remedy: Replace the board.