Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC6501 — Trang 34/44

Code: SC755

Description: Shift Motor Error: 3K Finisher (B830)
The shift tray half-turn sensors: Failed twice to detect the shift tray at the home position at the specified time. -or- Failed twice to detect that the shift tray had left the home position.
Causes: If the motor is operating 1. Half-turn sensor 1, 2 harnesses loose, broken, defective 2. One of the half-turn sensors defective If the motor is not operating: 1. Motor blocked by an obstruction 2. Motor harness loose, broken, defective 3. Motor defective 4. Finisher main board defective

Code: SC760

Description: Finisher punch motor error (B830)
The punch HP sensor is not activated within the specified time after the punch motor turned on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: • Punch HP sensor disconnected, defective • Punch motor disconnected, defective • Punch motor overload due to obstruction

Code: SC761

Description: Finisher folder plate motor error (D373)
The folder plate moves but is not detected at the home position within the specified time. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: Folder plate HP sensor disconnected, defective Folder plate motor disconnected, defective Folder plate motor overloaded due to obstruction.

Code: SC763

Description: Punch movement motor error
Occurs during operation of the punch unit. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: Motor harness disconnected, loose, defective Motor defective

Code: SC764

Description: Paper position sensor slide motor error
Occurs during operation of the punch unit. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: Motor harness disconnected, loose, defective Motor defective

Code: SC765

Description: Fold Unit Bottom Fence Lift Motor Error (D373)
The fold unit bottom fence did not return to the home position within the specified time.
Causes: • Fold bottom fence mechanism overloaded due to an obstruction • Fold bottom fence HP sensor connector loose, broken, defective • Fold bottom fence HP sensor defective • Fold bottom fence lift motor connector loose, broken, defective • Fold bottom fence lift motor defective • Main control board defective

Code: SC766

Description: Clamp Roller Retraction Motor (D373) The clamp roller did not return to the home position within the specified time.
Causes: • Clamp roller mechanism overloaded due to an obstruction • Clamp roller HP sensor connector loose, broken, defective • Clamp roller HP sensor defective • Clamp roller retraction motor connector loose, broken, defective • Clamp roller retraction motor defective • Main control board defective

Code: SC767

Description: Stack Junction Gate Motor (D373)
The stack junction gate did not return to the home position within the specified time.
Causes: • Stack junction mechanism overloaded due to an obstruction • Stack junction gate HP sensor connector loose, broken, defective • Stack junction gate HP sensor defective • Stack junction gate motor connector loose, broken, defective • Stack junction gate motor defective • Main control board defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie