Description: Delete All error 1: HDD
A data error was detected for the HDD/ NVRAM after the Delete All option was used. Note: The source of this error is the Data Overwrite Security Unit running from an SD card.
Causes: • Turn the main switch off/on and try the operation again. • Install the Data Overwrite Security Unit again.. • HDD defective
Description: Mechanical Counter 1 error
Mechanical Counter 1 was not set correctly at power on, or the operator disconnected the counter while machine was operating.
Description: Mechanical Counter 2 error
Mechanical Counter 2 was not set correctly at power on, or the operator disconnected the counter while machine was operating.
Description: External controller down
The EAC received an interrupt signal from the FLUTE serial driver during print jobs in progress and the connection between the copier and external controller was broken.
Description: Net File function error
The NetFile file management on the HDD cannot be used, or a NetFile management file is corrupted and operation cannot continue. The HDDs are defective and they cannot be debugged or partitioned, so the Scan Router functions (delivery of received faxes, document capture, etc.), Web services, and other network functions cannot be used. HDD status codes are displayed below the SC code:
Causes:
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.