• Code: 873
• Description: HDD mail transfer error An error is detected in the HDD at machine initialization.
• Causes: • Defective HDD • Power failure during an access to the HDD
• Remedy: 1. Initialize the HDD partition (SP5-832-008). 2. Replace the HDD.

• Code: 874
• Description: Delete All error 1: HDD An error is detected while all of the HDD or NVRAM are formatted physically by the Data Overwrite Security Unit (B735).
• Causes: • Data Overwrite Security Unit (SD card) not installed • Defective HDD
• Remedy: 1. Install the Data Overwrite Security Unit (B735). 2. Replace the HDD.

• Code: 875
• Description: Delete All error 2: Data area An error is detected while all of the HDD or NVRAM are formatted logically by the Data Overwrite Security Unit (B735).
• Causes: • The logical format for the HDD fails.
• Remedy: Turn the main switch off/on and try the operation again

• Code: 876
• Description: Log Data Error An error was detected in the handling of the log data at power on or during machine operation. This can be caused by switching the machine off while it is operating.
• Causes: -001 Log Data Error 1 • Damaged log data file in the HDD Initialize the HDD with SP5832-004. -002 Log Data Error 2 • An encryption module not installed 1. Disable the log encryption setting with SP9730-004 ("0" is off.) 2. Install the DESS module. -003 Log Data Error 3 • Invalid log encryption key due to defective NVRAM data 1. Initialize the HDD with SP5832-004. 2. Disable the log encryption setting with SP9730-004 ("0" is off.) -004 Log Data Error 4 • Unusual log encryption function due to defective NVRAM data Initialize the HDD with SP5832-004. -005 Log Data Error 5 • Installed NVRAM or HDD which is used in another machine 1. Reinstall the previous NVRAM or HDD. 2. Initialize the HDD with SP5832-004. -099 Log Data Error 99 • Other than the above causes Ask your supervisor.
• Remedy:

• Code: 877
• Description: HDD Data Overwrite Security SD card error The 'all delete' function cannot be executed but the Data Overwrite Security Unit (B735) is installed and activated.
• Causes: • Defective SD card (B735) • SD card (B735) not installed
• Remedy: 1. Replace the NVRAM and then install the new SD card (B735). 2. Check and reinstall the SD card (B735).

• Code: 878
• Description: TPM authentication error The authentication information mismatch between TPM and USB flash ROM on the controller board occurs.
• Causes: • Incorrect system updating • USB flash ROM defective
• Remedy: Replace the controller board.

• Code: 900
• Description: Electric counter error Abnormal data in the counters.
• Causes: • Defective NVRAM • Defective controller
• Remedy: 1. Check the connection between the NVRAM and controller. 2. Replace the NVRAM. 3. Replace the controller.

• Code: 910 ... 914
• Description: 910 CTL B External Controller Error 1 911 External Controller Error 2 912 External Controller Error 3 913 External Controller Error 4 914 External Controller Error 5 - - The external controller alerted the machine about an error.
• Causes: • Please refer to the instructions for the external controller (application).
• Remedy: