Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SPC430DN — Trang 12/17

Code: 641

Description: BCU control data transfer abnormal
A sampling of the control data sent from the BCU reveals an abnormality.
Causes: • Controller board defective • External noise • BCU defective
Remedy: 1. Check the connection between the controller board and BCU. 2. Replace the controller board. 3. Replace the BCU.

Code: 652

Description: Remote service ID2 mismatch error
The ID2 in the individual certificate does not match the ID2 in the NVRAM on the controller board.
Causes: • The controller board in this machine has already been used in a machine in which RC Gate was installed. • The controller board NVRAM in this machine has already been used in a machine in which RC Gate was installed.
Remedy: If an error occurs at installation of the RC Gate: 1. Check that the individual certificate is correct for the NVRAM in the machine and that the ID2 is correct. 2. Reinstall the RC Gate after writing the common certificate. If an error occurs after installation of the RC Gate: 1. Clear the RC Gate data. 2. Check that the individual certificate is correct for the NVRAM in the machine and that the ID2 is correct. 3. Reinstall the RC Gate after writing the common certificate.

Code: 653

Description: Remote service ID2 incorrect error
The ID2 in the NVRAM on the controller board is incorrect.
Causes: • ID2 is not exactly 17 bytes. • ID2 includes text which cannot be printed. • ID2 is all filled by spaces. • ID2 is null.
Remedy: 1. Clear the RC Gate data. 2. Reinstall the RC Gate after writing the common certificate.

Code: 669

Description: NVRAM error
Retry of NVRAM communication fails three times after the machine has detected the NVRAM error.
Causes: Caused by noise
Remedy: Turn the main power switch off and on.

Code: 670

Description: Engine start up error
The ready signal from the engine board is not detected.
Causes: Defective engine board.
Remedy: Replace the engine board.

Code: 671

Description: Engine board mismatch error
Engine board and controller mismatch detected.
Causes: • Wrong engine board installed. • Wrong controller board installed. • Check the type of engine board and controller board.
Remedy: 1. Replace the BCU. 2. Replace the controller board.

Code: 681

Description: RFID: Communication error
Causes: 001-005 Communication error occurs when the RFID starts to communicate with the RFID board. • Noise • No memory chip on the toner cartridge • Defective RFID CPU board • Defective RFID board • Disconnected RFID CPU board I/F • Disconnected RFID board I/F 1. Turn the main power off and on. 2. Replace the toner cartridge. 3. Replace the RFID CPU board. 4. Replace the RFID board. 061-164 Retry of RFID communication fails three times after the machine has detected the RFID communication error. • Defective RFID CPU board • Defective RFID board • No memory chip on the toner cartridge • Noise 1. Replace the toner cartridge. 2. Turn the main power off and on. 3. Replace the RFID CPU board. 4. Replace the RFID board.
Remedy:

Code: 682

Description: Memory chip at TD sensor: Communication error
Retry of memory chip communication fails three times after the machine has detected the memory chip communication error.
Causes: • Damaged memory chip data • Disconnected inter face • No memory chip on the development unit • Noise
Remedy: Replace the PCDU.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie