Description: Memory address command error The BCU does not receive a memory address command from the controller for the prescribed time after the paper has reached the registration sensor.
Remedy: 1. Check if the controller is firmly connected to the BCU. 2. Update the firmware of the controller. 3. Replace the HDD. 4. Update the firmware of the BCU. 5. Replace the BCU. 6. Replace the controller.
Description: GAVD communication error • The I2C bus device ID is not identified during initialization. • A device-status error occurs during I2C bus communication. • The I2C bus communication is not established due to an error other than a buffer shortage.
Description: Fatal kernel error Due to a control error, a RAM overflow occurred during system processing. One of the following messages was displayed on the operation panel.
Causes: • System program defective • Controller board defective • Optional board defective
Description: Self-diagnostics error: CPU [XXXX]: Detailed error code. [0612] CPU error During the self-diagnostic, the controller CPU detects an error. The CPU detects an error and displays the specific error code with the program address where the error occurs.
Causes: • System firmware problem • Defective controller
Remedy: 1. Turn the main switch off and on. 2. Reinstall the controller system firmware. 3. Replace the controller. When the problem cannot be fixed with the above procedure, the following information displayed on the screen needs to be fed back to a technical support center. • SC code • Detailed error code • Program address
Causes: [0F30] [0F31] • ASIC (Mandolin) for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. Replace the BCU [0F41] • ASIC (Mandolin) for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. Replace the BCU [50B1] Could not initialize or read the bus connection. • Check for l[50B2] Value of the SSCG register is incorrect. • Check for loose connections at the mother board. Replace the mother boardoose connections at the mother board. Replace the mother board
Description: Wireless LAN card not detected The wireless LAN card is not detected before communication is established, though the wireless LAN board is detected.
Causes: • Loose connection
Remedy: Check the connection.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.