Description: HDD Error b2: HDD Startup
The hard disks were detected at power on, but the disks were not detected within 30 s after recovery from the energy conservation mode.
Causes: • Cable between the hard disks and controller board disconnected or loose
• Hard disk power connector loose
• One of the hard disks is defective
• Controller or mother board defective
Description: HDD Error 3: Bad Sectors
The number of bad sectors on the HDD in the area for storing images exceeds 101
Causes: • Too many bad sectors accumulated on the HDDs.
• Execute SP5832 002 (HDD Formatting – IMH) to format the HDD and replace the bad sectors; copy the stamp data after doing this (use SP 5853).
• HDD replacement is recommended because an HDD unit that generates bad sectors is probably of poor quality and performs poorly.
Description: SD Card Error 1: Confirmation
The machine detects an electronic license error in the application on the SD card inserted in the controller slot when the machine is powered on. The program stored on the SD card contains electronic confirmation license data. If the program does not contain this license data, or if the result of the check reveals the license data in the program on the SD card is incorrect, then the checked program cannot execute and this SC code is displayed.
Causes: • Required program missing or incorrect
• Download the correct program for this machine onto the SD card.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.