Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D121 MP2852 — Trang 16/22

Code: 827

Description: Self-diagnostic error: Standard SDRAM DIMM [XXXX]: Detailed error code
Verification error
Causes: Error detected during a write/verify check for the standard RAM (SDRAM DIMM).
Remedy: 1. Turn the main switch off and on. 2. Replace the SDRAM DIMM. 3. Replace the controller.

Code: 828

Description: Self-diagnostic error: ROM
Causes: [0101] Check sum error 1 The boot monitor and OS program stored in the ROM DIMM is checked. If the check sum of the program is incorrect, this SC code is displayed.
Remedy:

Code: 829

Description: Self-diagnostic error: Optional RAM
Verification error
Causes: • Loose connection • Defective SDRAM DIMM • Defective controller
Remedy: [0301] Verification error Error detected during a write/verify check for the optional RAM (SDRAM DIMM). • Loose connection • Defective SDRAM DIMM • Defective controller 1. Turn the main switch off and on. 2. Replace the SDRAM DIMM. 3. Replace the controller. [0302] Memory structure data error The memory structure data error for the optional RAM (SDRAM DIMM) is detected when the self-diagnostic is executed. • Defective RAM DIMM • Defective SPD ROM on RAM DIMM • Defective 12C bus Replace the RAM DIMM.

Code: 833

Description: Self-diagnostic error 8: Engine I/F ASIC
Causes:
Remedy: [0F30] [0F31] ASIC for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. Replace the IPU. [0F41] ASIC for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. Replace the IPU. [50B1] Could not initialize or read the bus connection. Check for loose connections at the mother board. Replace the IPU. [50B2] Value of the SSCG register is incorrect. Check for loose connections at the mother board. Replace the IPU.

Code: 835

Description: Self-diagnostic error: Centronic device
Causes:
Remedy: [1102] Loopback connector is connected but check results in an error. • IEEE1284 connector error • Centronic loopback connector defective Replace the controller board. [110C] Loopback connector is connected but check results in an error. • ASIC device error • IEEE1284 connector error • Centronic loopback connector defective Replace the controller board. [1120] Centronic loopback connector is not connected for detailed self-diagnostic test. • Centronic loopback connector not connected correctly • Centronic loopback connector defective • ASIC device defective Replace the controller board.

Code: 838

Description: Self-diagnostic Error: Clock Generator. A verify error occurred when setting data was read from the clock generator via the I2C bus.
Causes: [2701] A verify error occurred when setting data was read from the clock generator via the I2C bus. • Defective clock generator • Defective I2C bus • Defective I2C port on the CPU
Remedy: Replace the controller board.

Code: 839

Description: USB flash error
This is a self-diagnostic error. The device ID of the on-board USB flash ROM was not recognized
Causes: • Defective controller board.
Remedy: Replace the controller board

Code: 840

Description: EEPROM error 1: EEPROM access
During the I/O processing, reading error is occurred. The 3rd reading failure issues this SC code. • During the I/O processing, writing error is occurred.
Causes: • Defective EEPROM
Remedy: Replace the EEPROM.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie