Description: HDD data encryption error Encryption of data on the hard disk failed.
Causes: • No HDD installed • Unformatted HDD • The encryption key on the controller is different from the one on the HDD
Remedy: [8] B HDD check error: The HDD is not correctly installed. • No HDD installed • Unformatted HDD • The encryption key on the controller is different from the one on the HDD 1. Install the HDD correctly. 2. Initialize the HDD. [9] B Power loss during encryption • Power failure during the data encryption Format the HDD. [10] Data read/write error • The DMAC error is detected twice or more. See SC863 below.
Description: HDD error 2 The HDD did not enter the ready status within 30 sec. after power on.
Causes: • Cable between HDC and HDD loose or defective • Cable between HDC and HDD loose or defective • HDD power connector loose or defective • HDD defective
Remedy: 1. Check the cable between HDC and HDD. 2. Reformat the HDD. 3. Replace the HDD. 4. Replace the controller board.