Mã lỗi Ricoh D124 MPCW2200SP — Trang 14/18
Code:
Tất cả lỗi (144)
SC101
SC143
SC144
SC161-02
SC161-03
SC161-05
SC161-1
SC165
SC200
SC201-01
SC201-02
SC202
SC202-01 ... SC202-05
SC202-11 ... SC202-16
SC202-21 ... SC202-26
SC202-30
SC202-41 ... SC202-46
SC202-51 ... SC202-56
SC202-61 ... SC202-65
SC202-70
SC203
SC203-11 ... SC203-15
SC203-21 ... SC203-25
SC203-31 ... SC203-35
SC203-51 ... SC203-55
SC210
SC211-01
SC211-02
SC212
SC251-01
SC251-02
SC280
SC282-11 ... SC282-15
SC283
SC285
SC290-01 ... SC290-05
SC293-01 ... SC293-05
SC400
SC503
SC504
SC508-01
SC508-02
SC508-03
SC508-04
SC520-01
SC520-02
SC520-03
SC521-01
SC521-02
SC522-01
SC522-02
SC530
SC540
SC571-01
SC571-02
SC573-01
SC573-02
SC632
SC633
SC634
SC635
SC636-01
SC636-02
SC636-11
SC637-01
SC637-02
SC640
SC641
SC650-01
SC650-04
SC650-05
SC650-13
SC650-14
SC651-01
SC651-02
SC652
SC653
SC669
SC670
SC672
SC680-01
SC680-02
SC680-03
SC680-04
SC685
SC686-21 ... SC686-28
SC686-31 ... SC686-38
SC686-41 ... SC686-48
SC687
SC816
SC817
SC819
SC821
SC822
SC823
SC824
SC833
SC834
SC838
SC840
SC841
SC842
SC850
SC851
SC853
SC854
SC855
SC857
SC858
SC859-01
SC859-02
SC859-08
SC859-09
SC859-10
SC860
SC861
SC862
SC863
SC864
SC865
SC866
SC867
SC868
SC870
SC872
SC873
SC874
SC875
SC876
SC877
SC878
SC880
SC881
SC899
SC900
SC920
SC921
SC925
SC990
SC991
SC992
SC994
SC997
SC998
Description: Bluetooth device connection error
Causes: The Bluetooth interface unit was installed while the machine was turned on.
Remedy: •X Cycle the machine off/on •X Confirm that the Bluetooth interface unit was installed correctly. •X Cycle the machine off/on again.
Description: Bluetooth device removed
Causes: The Bluetooth interface unit was removed while the machine was turned on.
Remedy: •X Cycle the machine off/on •X Confirm that the Bluetooth interface unit was installed correctly. •X Cycle the machine off/on again.
Description: Hardware Problem:wireless LAN board CTL The wireless LAN board can be accessed, but an error was detected.
Causes: •X Loose connection •X Defective wireless LAN card
Remedy: •X Check wireless LAN card connection •X Replace wireless LAN card
Description: USB I/F Error
Causes: The USB driver is not stable and caused an error.
Remedy: •X Poor USB card connection •X Replace the controller board
Description: Data encryption conversion error
Causes: These are errors of the HDD Data Encryption Option D377.
Remedy:
Description: Data encryption conversion errors. HDD encrypted data restoration error Data could not be restored after encryption
Causes: •X HDD connection loose, broken, defective •X Format HDD •X HDD defective
Remedy:
Description: Data encryption conversion errors. Power interrupt error Power supply was interrupted during data encryption.
Causes: •X Cycle the machine off/on
Remedy:
Description: Data encryption conversion errors. HDD Check Error
Causes: Data conversion was attempted with no HDD unit present. •X Confirm that HDD unit installed correctly •X Initialize HDD with SP5832-1 Note: After installation, a new HDD should be formatted with SP5832-1
Remedy: