Description: Paper bank 1 error (Paper Feed Unit or LCT) (Paper lift error) (D158/D159) The paper lift sensor fails to activate after the tray lift motor has been on for 18 seconds
Causes: • Paper lift sensor • Tray lift motor • Poor tray lift motor connection • Broken harness • Defective bank controller board
Description: Paper bank 1 error (Paper Feed Unit or LCT) (Upper limit error) (D158/D159) The paper lift sensor fails to activate three times continuously right after the tray lift motor has been turned on.
Causes: • Paper lift sensor • Broken harness • Defective bank controller board
Description: Tray 4 error (D160/D161/D170) The paper lift sensor fails to activate three times continuously after the tray lift motor has been on for 18 seconds.
Causes: • Paper lift sensor • Tray lift motor • Broken harness • Defective bank controller board
Description: Paper bank 2 error (Paper Feed Unit or LCT) (Paper lift error) (D158/D159) The paper lift sensor fails to activate after the tray lift motor has been on for 18 seconds.
Causes: • Paper lift sensor • Tray lift motor • Broken harness • Defective bank controller boardnds.
Description: Paper bank 2 error (Paper Feed Unit or LCT) (Upper limit error) (D158/D159) The paper lift sensor fails to activate right after the tray lift motor has been turned on.
Causes: • Paper lift sensor • Broken harness • Defective bank controller board
Description: By-pass bottom plate error The signal from the by-pass tray HP sensor does not change for 1.0 second after the by-pass motor has rotated counterclockwise. If this condition occurs three consecutive times, the SC is generated.
Causes: • Disconnect or defective harness of the by-pass motor • Defective or disconnected connection for the by-pass motor.