Code :

Code: 828
Description: Self-diagnostic error 7: ROM
Measuring the CRC for the boot monitor and operating system program results in an error. A check of the CRC value for ROMFS of the entire ROM area results in an error.
Causes: • Software defective • Controller board defective • ROM defective

Code: 829
Description: Self-diagnostic Error: Optional RAM
The optional RAM returned an error during the self-diagnostic test.
Causes: • Replace the optional memory board • Controller board defective

Code: 833
Description: Self-diagnostic error 8: Engine I/F ASIC
Causes: 0F30 0F31 ASIC (Mandolin) for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. • ASCI (Mandolin) for system control is defective • Interface between North Bridge and AGPI is defective • Replace the mother board 0F41 The read/write check done for resident RAM on the mother board could not be done correctly. • Memory device defective • Replace the mother board 50B1 Could not initialize or read the bus connection. • Bus connection defective, loose • SSCG defective • Replace the mother board 50B2 Value of the SSCG register is incorrect. • Bus connection loose, defective • SSCG defective • Replace the mother board

Code: 834
Description: Self-diagnostic error 9: Optional Memory RAM DIMM 5101 The write/verify check for the optional RAM chip on the engine mother board gave an error.
Causes: • Controller defective • Mother board defective

Code: 838
Description: Self-diagnostic Error: Clock Generator A verify error occurred when setting data was read from the clock generator via the I2C bus
Causes: • Replace the controller board

Code: 839
Description: Serial Flash A read/write operation on the Software Status Register failed.
Causes: • Replace the controller board

Code: 850
Description: Net I/F error Duplicate IP addresses. Illegal IP address. Driver unstable and cannot be used on the network
Causes: • IP address setting incorrect • NIB (PHY) board defective • Controller board defective