Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh G180 SPW2470 Neptune-P1 — Trang 6/12

Code: 790

Description: PCB fan error: Folder Unit The machine detected a continuous lock signal from the PCB cooling fan on the PSU for 20 sec.
Causes: • Fan harness connector loose, disconnected, broken • Overload on the fan motor due to physical obstruction such has undetected paper, etc. • Fan defective • MCU folder unit defective
Remedy:

Code: 819

Description: Fatal kernel error Due to a control error, a RAM overflow occurred during system processing.
Causes: • Controller board defective • Insufficient memory • Expanded memory defective
Remedy:

Code: 820

Description: Self-Diagnostic Error: CPU The CPU returned an unexpected error during the self-diagnostic test.
Causes: • Controller board defective • Insufficient memory • Expanded memory defective
Remedy:

Code: 821

Description: Self-diagnostic error 2: ASIC The ASIC provides the central point for the control of bus arbitration for CPU access, for option bus and SDRAM access, for SDRAM refresh, and for management of the internal bus gate.
Causes: • Controller board defective
Remedy: For more details about this SC code error, execute SP5990 to print an SMC report so that you can read the error code. The error code is not displayed on the operation panel.

Code: 822

Description: Self-diagnostic error 3: HDD An error occurred when the self-check was performed when the machine was switched on after the HDD was replaced. (The diagnostic command was issued to the HDD device but the result was an error).
Causes: • HDD defective • HDD harness disconnected, defective • Controller board defective
Remedy:

Code: 823

Description: Self-diagnostic Error: NIB The network interface board returned an error during the self-diagnostic test.
Causes: • Network interface board defective • Controller board defective
Remedy:

Code: 824

Description: Self-diagnostic error 4: NVRAM Error occurred because: • NVRAM device does not exist • NVRAM device is damaged • NVRAM socket damaged
Causes: • NVRAM defective
Remedy:

Code: 826

Description: Self-diagnostic Error 5: RTC/Optional NVRAM The NVRAM or optional NVRAM returned an error during the self-diagnostic test.
Causes: • Make sure NVRAM is seated correctly in its socket • Replace the NVRAM on the controller board
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie