Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh M020 SP5200DN — Trang 6/10

Code: 820

Description: Self-Diagnostic Error: CPU
The central processing unit returned an error during the self-diagnostic test.
Causes: Controller board defective. Software defective.
Remedy: 1. Replace the software. 2. Replace the controller board.

Code: 833

Description: Self-diagnostic error 8: Engine I/F ASIC
Causes: ASIC (engine board defective) 0F30 0F31 0F41 ASIC for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. 1. Replace the engine board. 50B1 The system control could not initialize or read the bus connection. 1. Check for loose connections at the engine board. 2. Replace the engine board. 50B2 Value of the SSCG register is incorrect. 1. Check for loose connections at the engine board. 2. Replace the engine board.
Remedy:

Code: 851

Description: IEEE 1394 I/F error
Driver setting incorrect and cannot be used by the 1394 I/F.
Causes: NIB (PHY), LINK module defective. Controller board defective.
Remedy: 1. Change the interface board. 2. Replace the controller board.

Code: 853

Description: Wireless LAN Error 1
During machine start-up, the machine can get access to the board that holds the wireless LAN, but not to the wireless LAN card (802.11b or Bluetooth).
Causes: Wireless LAN card missing (was removed). Improper installation of the Wireless LAN card.
Remedy: 1. Turn the power switch Off and On. 2. Install the wireless LAN card properly.

Code: 854

Description: Wireless LAN Error 2
During machine operation, the machine can get access to the board that holds the wireless LAN, but not to the wireless LAN card (802.11b or Bluetooth).
Causes: Wireless LAN card missing (was removed) during operation
Remedy: 1. Once turn off the oower, reinstall the wireless LAN card, and then turn on the power. 2. Insert the wireless LAN card firmly.

Code: 855

Description: Wireless LAN error 3
An error was detected on the Wireless LAN card (802.11b or Bluetooth).
Causes: Wireless LAN card defective. Wireless LAN card connection incorrect
Remedy: 1. Connect the wireless LAN card correctly. 2. Replace the wireless LAN card.

Code: 856

Description: Wireless LAN error 4
An error was detected on the wireless LAN card (802.11b or Bluetooth).
Causes: Wireless LAN card defective. PCI connector (to the mother board) loose
Remedy: 1. Connect the PCI connector firmly. 2. Replace the wireless LAN card.

Code: 857

Description: USB I/F Error
The USB driver is not stable and caused an error.
Causes: Bad USB card connection. Defective controller board.
Remedy: 1. Connect the USB card correctly. 2. Replace the controller board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie