Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh M020 SP5200DN — Trang 10/10

Code: 995

Description: CPM setting error
Causes: -01 • Defective BCU • NVRAM Replacement error 1. Install the previous NVRAM. 2. Input the serial number with SP5-811-004, and turn the main power switch off and on. -02 • Defective NVRAM • Defective controller 1. Update the controller firmware. 2. Install a new NVRAM, and turn off and on the main power switch after SC995-002 has occurred. -03 • Incorrect type controller installed • Defective controller 1. Replace the controller with the correct type. -04 • Incorrect model controller installed. 1. Replace the controller with the correct model.
Remedy:

Code: 998

Description: Application start error
No applications start within 60 sec. after the power is turned on.
Causes: Loose connection of RAM-DIMM, ROM-DIMM. Software problem. Controller board defective.
Remedy: 1. Check the setting of SP5875-001. If the setting is set to "1 (OFF)", change it to "0 (OFF)". 2. Connect the RAM-DIMM, ROM-DIMM correctly. 3. Reinstall the controller system firmware. 4. Replace the controller board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie