Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh M020 SP5200DN — Trang 2/10

Code: 240

Description: LD error
The IPU detected a problem at the LD unit.
Causes: Defective LD unit. Disconnect harness. Disconnect LD Driver.
Remedy: • Connect the harness properly. • Replace the LD unit.

Code: 312

Description: Charge roller current leak
The PWM duty output exceeded 50% for longer than 200 ms, indicating a leak in the charge roller current.fective BCU.
Causes: Cartridge (charge roller) defective. High voltage supply board defective. Disconnect harness.
Remedy: • Turn the Power Switch Off and On. • Connect the harness properly. • Replace the AIO unit. • Replace the High voltage power supply board.

Code: 320

Description: Development Bias leak
The PWM duty output exceeded 50% for longer than 200 ms, indicating a leak in the charge roller current.
Causes: Bias applying section leak. High voltage supply board defective. Disconnect harness. Development Bias CN loose
Remedy: • Connect the harnesses properly. • Replace the AIO. • Replace High voltage power supply board.

Code: 440

Description: Primary Transfer PP output leak
The PWM duty output exceeded 50% for longer than 200 ms, indicating a leak in the charge roller current.
Causes: High voltage supply board defective. Disconnect harness. Development Bias CN loose
Remedy: • Connect the harnesses properly. • Replace the AIO. • Replace High voltage power supply board.

Code: 500

Description: Main motor lock
The machine does not detect a main motor lock signal within 1 second after the main motor starts to rotate. -or- The machine does not detect a main motor lock signal for 250 ms continuously while the main motor is rotating.
Causes: Mechanical overload on the drive mechanism. Main motor defectivess.
Remedy: • Remove foreign materials on the drive mechanism. • Turn the Power Switch Off and On. • Connect the harnesses properly. • Replace the main motor.

Code: 530

Description: Exhaust fan motor error
The CPU detects an exhaust fan lock signal for more than 2 seconds.
Causes: Mechanical overload on the Exhaust fan mechanism. Exhaust fan harness loose or broken
Remedy: • Remove foreign materials on the drive mechanism. • Turn the Power Switch Off and On. • Connect the harnesses properly. • Replace the Exhaust fan.

Code: 531

Description: Reverse Fan Motor error
The CPU detects a Reverse fan lock signal for more than 2 seconds.и#0
Causes: Mechanical overload on the Reverse fan mechanism. Reverse fan harness loose or broken
Remedy: • Remove foreign materials from the reverse fan. • Turn the Power Switch Off and On. • Connect the harnesses properly. • Replace the reverse fan.

Code: 532

Description: PSU Fan Motor error
The CPU detects a PSU fan lock signal for more than 2 seconds.
Causes: Mechanical overload on the PSU fan mechanism. PSU fan harness loose or broken
Remedy: • Remove foreign materials from the PSU fan. • Turn the Power Switch Off and On. • Connect the harnesses properly. • Replace the PSU fan.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie