• Code: 861
• Description: HDD error 2 The HDD did not enter the ready status within 30 sec. after power on.
• Causes: • Cable between HDC and HDD loose or defective • HDD power connector loose or defective • HDD defective • Replace the controller board
• Remedy:

• Code: 863
• Description: HDD error 3 Startup without HD data lead. Data stored on the hard disk is not read correctly, due to a bad sector on the HDD
• Causes: • Format the HDD • HDD defective • Controller board defective
• Remedy:

• Code: 864
• Description: HDD error 4 HD data CRC error. During operation of the HD, the HD responded with a CRC error.
• Causes: • HDD defective
• Remedy:

• Code: 865
• Description: HDD error 5 HDD responded to an error during operation for a condition other than those for SC863 or 864.
• Causes: • HDD defective
• Remedy:

• Code: 866
• Description: SD card error 1: Recognition error The SD card in the slot contains illegal program data.
• Causes: • Use only SD cards that contain the correct data.
• Remedy:

• Code: 867
• Description: SD card error 2: SD card removed The SD card in the boot slot when the machine was turned on was removed while the machine power was on.
• Causes: • Insert the SD card, then turn the machine off and on.
• Remedy:

• Code: 868
• Description: SD card error 3: SD card access An error occurred while an SD card was used.
• Causes: • SD card not inserted correctly • SD card defective • Controller board defective Note: If you want to try to reformat the SD card, use SD Formatter Ver 1.1.
• Remedy:

• Code: 870
• Description: Address Book Data Error Address book data stored on the hard disk was detected as abnormal when it was accessed from either the operation panel or the network.
• Causes: • Initialize the address book data (SP5-846-050). • Initialize the user information (SP5-832-006). • Replace the HDD.HDD defective
• Remedy: