Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh M075 SPC320DN MD-P2 — Trang 9/9

Code: 991

Description: Software error 2
The software performs an unexpected function. However, unlike SC990, recovery processing allows the program to continue.
Causes: • Software defective, re-boot
Remedy:

Code: 992

Description: Erratic SC error
There was an unusual operation by the software because of: • An incorrect argument in the program. • An incorrect internal parameter. • Work memory not sufficient. • An error occurred that could not be detected by other SC codes.
Causes: • Turn the main power switch off/on. • Go into the SP mode. Do SP7901 to display details about SC992 (software file name, line number, and variable), and inform your supervisor of the results
Remedy:

Code: 997

Description: Cannot select application function
An application did not start after the user pushed the correct key on the operation panel.
Causes: • Software bug • A RAM or DIMM option required for the application is not installed or not installed correctly.
Remedy:

Code: 998

Description: Application cannot start
Register processing does not operate for an application within 60 s after the machine power is turned on. No applications start correctly, and all end abnormally.
Causes: • Software bug • A RAM or DIMM option needed for the application not installed, or not installed correctly • Controller board defective
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie