• Code: 792-9
• Description: Ring Binder (D392) Pre-bind jogger clamp HP error Not detected at HP after the time prescribed to arrive at the HP had elapsed (more than 400 ms) (1st detection, jam, 2nd detection, SC error) -or- Detected at HP after the time prescribed to leave the HP had elapsed (more than 400 ms) (1st detection, jam, 2nd detection, SC error)
• Causes: • Spine clamp motor (M605) connector loose, broken, defective • Motor defective • Motor overload • Clamp HP sensor (S603) connector loose, broken, defective • Sensor defective
• Remedy:

• Code: 793-001
• Description: Stacker 1: Tray Exit Roller Unit Error • The tray exit roller HP sensor does not detect the tray exit roller for 0.35 seconds at initialization. • The tray exit roller HP sensor still detects the tray exit roller for 0.3 seconds after the tray exit roller has moved to its home position.
• Causes: • Tray exit roller HP sensor defective • Tray exit roller motor defective
• Remedy:

• Code: 793-002
• Description: Stacker 1: Jogger Error • The front and rear jogger HP sensor does not detect the jogger fence for 1 second at initialization. • The front and rear jogger HP sensor still detect the jogger for 0.3 seconds after the front and rear jogger have moved to their home position.
• Causes: • Front or rear jogger HP sensor defective • Front or rear jogger motor defective
• Remedy: 1. Replace the front or rear jogger HP sensor. 2. Replace the front or rear jogger motor.

• Code: 793-003
• Description: Stacker 1: Leading Edge Jogger Error • The leading edge jogger HP sensor does not detect the jogger fence for 2.7 seconds at initialization. • The leading edge jogger HP sensor still detects the leading edge jogger for 0.3 seconds after the leading edge jogger has moved to its home position.
• Causes: • Leading edge jogger HP sensor defective • Leading edge jogger motor defective
• Remedy: 1. Replace the leading edge jogger HP sensor. 2. Replace the leading edge jogger motor.

• Code: 793-004
• Description: Stacker 1: Stack Tray Error • The tray lift motor encoder sensor does not detect any change for 0.03 seconds. • The tray position detection sensor does not detect a normal operation.
• Causes: • Tray lift motor encoder sensor defective • Tray HP sensor defective • Tray full sensor defective • Tray unload position sensor defective • Tray upper limit switch defective • Tray lower limit switch defective
• Remedy: 1. Replace the tray lift motor encoder sensor. 2. Replace the tray HP sensor. 3. Replace the tray full sensor. 4. Replace the tray unload position sensor. 5. Replace the tray upper limit switch. 6. Replace the tray lower limit switch.

• Code: 794-001
• Description: Stacker 2: Tray Exit Roller Unit Error
• Causes: • Tray exit roller HP sensor defective • Tray exit roller motor defective
• Remedy: 1. Replace the tray exit roller HP sensor. 2. Replace the tray exit roller motor.

• Code: 794-002
• Description: Stacker 2: Jogger Error
• Causes: • Front or rear jogger HP sensor defective • Front or rear jogger motor defective
• Remedy: 1. Replace the front or rear jogger HP sensor. 2. Replace the front or rear jogger motor.

• Code: 794-003
• Description: Stacker 2: Leading Edge Jogger Error
• Causes: • Leading edge jogger HP sensor defective • Leading edge jogger motor defective
• Remedy: 1. Replace the leading edge jogger HP sensor. 2. Replace the leading edge jogger motor.