Danh mục sản phẩm

Code :

Code: 028 S96
Description: ORCNL PCB on machine left side not connected The connection of the ORCNL PCB on the machine left side cannot be confirmed.

Code: 029 S96
Description: HC Control PCB timeout The Busy signal on the HC control PCB will not be deactivated upon the start of communication from the MC PCB.

Code: 030 M01
Description: Maintenance call Maintenance count reached the maximum at machine ON, all-reset, or at end of print job. * The maintenance count is set by the Test Mode.

Code: 031 S99
Description: Multi-tray paper feed communication error 1 Multi-tray paper feed power line error

Code: 032 S99
Description: Multi-tray paper feed timeout The machine status command transmitted from the paper feed device on the base was outside the specified range (phase error). Or the [Preparation complete] status command was not received within the specified interval after receiving the [Preparing] status command.

Code: 033 S99
Description: Multi-tray paper feed communication error 1 The machine status command was not received from the paper feed device on the base within the specified interval (when the papaer feed device on the base does not respond).

Code: 034 S99
Description: Multi-tray paper feed communication error 2 Base paper feed initialization information completion command was not received within the specified time of 1 second after the base paper feed initialization command was issued.

Code: 035 S99
Description: Multi-tray paper feed communication error 3 Status information could not be transmitted during communications with the auto fence function within the specified interval.

< 1 2 3 4 5 6 7 > Last ›

0