Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Riso HC5500 — Trang 9/46

Code: 104 S02

Description: Elevator motor timeout The upper limit sensor fails to activate when the elevator rising operation is activated within the specified interval.

Code: 105 X14

Description: Standard paper feed tray multiple feed A multiple feed was detected during transport of paper from the standard paper feed tray.

Code: 106 X01

Description: Standard paper feed tray feed failure (no paper transport) The registration sensor fails to activate when the specified number of clock inputs is issued from the belt encoder after paper transport from the standard paper feed tray begins

Code: 107 X03

Description: Exit sensor paper end exiting delay The trailing edge of the paper sheet does not pass the exit sensor (sensor detecting the presence of paper) within the specified interval based on the belt encoder pulse count.

Code: 108 X02

Description: Jammed paper at registration sensor section when the cover is closed The registration sensor detects paper when the cover is closed or during the interval in which the paper transport roller idling is controlled when the cover is closed.

Code: 109 X03

Description: Jammed paper at exit sensor section when the cover is closed The exit sensor detects paper when the cover is closed or during the interval in which the paper transport roller idling is controlled when the cover is closed.

Code: 110 W02

Description: No paper in standard paper feed tray The standard paper feed tray is empty when it is selected as the feed tray.

Code: 111 Z11

Description: Standard paper feed tray elevator upper limit SW detection The upper limit SW for the standard paper feed tray is turned ON.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie