Danh mục sản phẩm

Code :

Code: 128 W42
Description: Mixed paper size error.One or more of the following selection is incorrect.
* The paper size combination must be A4R&A3, B5R&B4, Letter&Ledger.
* Auto tray must be selected.
* Z-folding must be selected for the larger of the paper.
W40* Mixed paper size must be selected to ON.

Code: 129 W40
Description: In correct envelope size. With HC-Finisher connected in envelope printing, the total length of the paper registered, including the envelope margin is over 488mm. (Menu 5.1 + Menu 5.8.26).

Code: 130 W40
Description: HC-Finisher paper ejection tray selection error with envelope printing. The [Top Tray] was not selected for the receiving tray for the envelopes.

Code: 1xx
Description: Paper discharge system

Code: 200 S03
Description: Transfer belt motor timeout The motor shaft encoder of the transfer belt motor does not attain the specified pulse count within the specified time. The required movement does not complete even when the transfer belt motor operates for the specified interval.

Code: 201 S03
Description: Transfer belt unit sensor error The three sensors that determine the position of the belt platen produced an abnormal detection result.

Code: 202 S01
Description: Transfer belt motor error An alarm signal from the DC servo motor was detected (detection of overcurrent during operations).

Code: 203 S01
Description: Transfer belt motion speed error The clock frequency of the belt motor shaft encoder falls outside the specified range.

‹ First < 9 10 11 12 13 14 15 > Last ›

0