Mã lỗi Roland CT304 — Trang 4/5
Code:
50
Display: ERROR 50 X-SENSOR
Description: X-sensor is defective. Light shielding plate has been improperly installed. Cable has disconnected. CPU circuit board is defective.
Code:
51
Display: ERROR 51 Y SENSOR
Description: Y-sensor is defective. Light shielding plate has been improperly installed. Cable has disconnected. CPU circuit board is defective.
Code:
52
Display: ERROR 52 O-ORIGIN
Description: O-axis origin detection failure
Code:
53
Display: ERROR 53 Z-ORIGIN
Description: Z-axis travel cannot be performed.
Code:
62
Display: ERROR 62 VACUUM/TILT
Description: Thermal relay is fed with an overcurrent. Faulty blower.
Code:
70
Display: ERROR 70 O-OVERLOAD
Description: Load applied to O-axis motor has increased to an abnormal level.
Code:
71
Display: ERROR 71 O-OVERCURRENT
Description: Overcurrent error on O-axis motor
Code:
72
Display: ERROR 72 CUTTER Z LOAD
Description: Load applied to Z-axis motor has increased to an abnormal level.