Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Roland CT304 — Trang 3/5

Code: 30

Display: ERROR 30 OPERATION
Description: An erroneous operation has been taken (such that SELF TEST is executed while the device is engaged in self test or COPY is executed while the device is engaged in copying).

Code: 31

Display: ERROR 31 NO DATA
Description: No data is present in the receiving buffer though 'COPY' operation is executed.

Code: 32

Display: ERROR 32 TOO LARGE
Description: COPY has been executed after receiving data of which amount exceeds the capacity of the receiving buffer.

Code: 40

Display: ERROR 40 X OVERLOAD
Description: Load applied to servo-motor X has increased to an abnormal level.

Code: 41

Display: ERROR 41 Y OVERLOAD
Description: Load applied to servo-motor Y has increased to an abnormal level.

Code: 42

Display: ERROR 42 X OVERCURRENT
Description: Overcurrent error of servo-motor X has been detected. (The mean current exceeds the rated current of the motor.)

Code: 43

Display: ERROR 43 Y OVERCURRENT
Description: Overcurrent error of servo-motor Y has been detected. (The mean current exceeds the rated current of the motor.)

Code: 46

Display: ERROR 46 PEN SENSOR
Description: FPC circuit board is improperly positioned. Head circuit board is defective. CPU circuit board is defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie