Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Roland CT304 — Trang 2/5

Code: 11

Display: ERROR 11 PARAMETER
Description: A parameter that is outside the specified range of values is received.

Code: 12

Display: ERROR 12 DEVICE
Description: Cutting (plotting) cannot be initiated since an amount of data exceeding the capacity of the receiving buffer is sent from thehost computer and no plot start command is present in the receiving buffer. Device command is abnormal.

Code: 13

Display: ERROR 13 POLYGON
Description: Polygon data sent exceeds the capacity of polygon buffer.

Code: 20

Display: ERROR 20 I/O
Description: Energizing has been carried in a wrong order. Communication conditions are defective.

Code: 23

Display: ERROR 23 LOOPBACK S
Description: Signal line is in abnormal conditions.

Code: 24

Display: ERROR 24 LOOPBACK R
Description: No interruption takes place in data receiving.

Code: 25

Display: ERROR 25 LOOPBACK T
Description: No interruption takes place during data sending.

Code: 26

Display: ERROR 26 LOOPBACK D
Description: Data received is defective.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie