• Code: 0102
• Description: Even though the machine carries out the regular movement, the output of Head Lock Sensor does not reach the expected value.
• Causes: Head Lock Sensor does not work correctly or is broken.

• Code: 0103
• Description: Even though the machine carries out the regular movement, the output of Limit Sensor does not reach the expected value.
• Causes: Limit Sensor does not work correctly or is broken.

• Code: 0105
• Description: Tool Carriage Connection Error
• Causes: Fault of Tool Carriage Connection Loose of Connection Part Fault of the Limit Position Initialize value Limit Sensor does not work correctly or is broken.

• Code: 0106
• Description: Machine fails to disconnect the Tool Carriage from the Head Carriage.
• Causes: Fault of Tool Carriage Connection Loose of Connection Part Fault of the Limit Position Initialize value Limit Sensor does not work correctly or is broken.

• Code: 0107
• Description: Linear Encoder Setup has not been done.
• Causes: Linear Encoder Setup has not been done. Linear Encoder Setup is ended before it is completed.

• Code: 0109
• Description: Even though the machine carries out the regular movement, the output of the Wiper Sensor does not reach the expected value.
• Causes: Wiper Motor error Defect of Wiper Unit Defect of Wiper Sensor Cut-line or short-circuit of cable and Flexible cable

• Code: 0110
• Description: Input value from Linear Encoder is not changed by the Linear Encoder origin setup. When Motor stops during printing, expected movement is not completed on some head.
• Causes: Read error of Linear Encoder. Read error of Encoder on Scan Motor side. Belt is not fixed to Head Carriage firmly.

• Code: 0111
• Description: This error occurs when the machine performs the Auto Crop Mark Detection
• Causes: Crop-Cut Adjustment in the Service menu has not been performed