Mã lỗi Samsung CLP660N — Trang 4/8
Code:
25
Display: Low Power
Description: The machine is in the previous stage of the power save mode.
Remedy: When data is received, it switches to on-line automatically.
Code:
26
Display: LSU C-Hsync Err. Cycle Power
Description: There is a problem in the laser beam detecting device of the LSU (Laser Scanning Unit).
Remedy: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.
Code:
27
Display: LSU C-Motor Err. Cycle Power
Description: There is a problem in the LSU (Laser Scanning Unit) motor.
Remedy: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.
Code:
28
Display: LSU Hsync Error Cycle Power
Description: There is a problem in the laser beam detecting device of the LSU (Laser Scanning Unit).
Remedy: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.
Code:
29
Display: LSU M-Hsync Err. Cycle Power
Description: There is a problem in the laser beam detecting device of the LSU (Laser Scanning Unit).
Remedy: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.
Code:
30
Display: LSU Motor Error Cycle Power
Description: There is a problem in the LSU (Laser Scanning Unit) motor.
Remedy: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.
Code:
31
Display: LSU Y-Hsync Err. Cycle Power
Description: There is a problem in the laser beam detecting device of the LSU (Laser Scanning Unit).
Remedy: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.
Code:
32
Display: LSU Y-Motor Err. Cycle Power
Description: There is a problem in the LSU (Laser Scanning Unit) motor.
Remedy: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.