Code :

Code: C9-1112, C9-1116
Display: Replace new Tray1 roller Replace new Tray1 roller
Description: The pick up roller or reverse roller is at the end of its life.
Remedy: 1) Turn the machine off. 2) Replace the pick up roller Assy and reverse roller Assy.

Code: C9-1122, C9-1126
Display: Replace new Tray2 roller Replace new Tray2 roller
Description: The pick up roller or reverse roller is at the end of its life.
Remedy: 1) Turn the machine off. 2) Replace the pick up roller Assy and reverse roller Assy from the tray2

Code: H1-1210
Display: Paper Jam in Tray 2
Description: The jammed paper has occurred in the tray2.
Remedy: 1) Remove the jammed paper. 2) If the jammed paper occurs continually, check the followings. a) Check if the pick up/forward/reverse roller are worn out or contaminated. Clean the contaminated part or replace it. b) Check if the actuator is assembled correctly. 3) If the pick up clutch is defective, replace it.

Code: H1-1252
Display: Paper Empty in Tray 2
Description: Paper is empty in Tray1
Remedy: 1) Take off the cassette. If there is no paper on the tray2, load the paper. 2) If the problem persists, check the following. a) Check if the paper empty sensor is contaminated or defective. Replace it.

Code: M1-1110
Display: Paper Jam in Tray 1
Description: The jammed paper has occurred in the tray1.
Remedy: 1) Remove the jammed paper. 2) If the jammed paper occurs continually, check the followings. a) Check if the pick up/forward/reverse roller are worn out or contaminated. Clean the contaminated part or replace it. b) Check if the actuator is assembled correctly. 3) Check the motor operation, gear in the PH drive unit. If there is any defective parts, replace it or PH drive unit.

Code: M1-1610
Display: Paper Jamin MP tray
Description: The jammed paper has occurred in the MP tray.
Remedy: 1) Remove the jammed paper. 2) If the jammed paper occurs continually, check the followings. a) Check if the pick up/forward/reverse roller are worn out or contaminated. Clean the contaminated part or replace it. b) Check if the actuator is assembled correctly. 3) If the pick up clutch is defective, replace it. 4) If the problem persists, replace the MP unit.

Code: M1-5112, M1-5612
Display: Paper Empty in Tray1 Paper Empty in MP Tray
Description: Paper is empty in Tray1
Remedy: 1) Take off the cassette. If there is no paper on the tray, load the paper. 2) If the problem persists, check the following. a) Check if the paper empty sensor is contaminated or defective. Replace it.

< 1 2 3 4 5 6 >