Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Samsung ML1865W — Trang 2/2

Code: S6-3121

Display: Wireless Network not installed.
Description: Machine does not detect wireless network card even thought card is connected physically. This error is occurred when machine booting up.
Remedy: 1. Check Network confi guration Report. 2. Check wireless card connector is inserted to socket well. 3. Replace wireless card module to new one.

Code: S6-3123

Display: IP address confl ict
Description: Machine IP address is confl ict to other machine. Machine can’t print data from Host PC (but, Report printing available)
Remedy: Change IP address. ** IP Change Method 1. Connect USB. 2. Execute PSU. 3. Select Network Confi guration Menu. 4. Change IP. 5. Press “adapt” button.

Code: U1-2113

Display: Fuser Unit Failure #U1-2113. Please turn off then on.
Description: Fuser Unit is transferred Power.
Remedy: 1. Turn the machine off and turn it on again. 2. Check the following : A. Check the power voltage of the fuser unit. (110V, 220V) B. Check if the Heat lamp is broken. C. Check if the AC connection of Heat lamp is disconnected or contaminated. D. Check if the thermostat is blown. E. Check if there is any jammed paper in fuser unit. F. Check if the power voltage is normal. (Is the voltage during the operation ±10% of the rated voltage?) 3. If the problem persists, replace the fuser unit. 4. If the problem persists after replacing the fuser unit, replace the engine board or SMPS.

Code: U1-2131

Display: Fuser Unit Failure #U1-2131. Please turn off then on.
Description: The Fuser is being diagnosed for Low Heat Error.
Remedy: 1. Turn the machine off and turn it on again. 2. Check the following : A. Check the power voltage of the fuser unit. (110V, 220V) B. Check if the Heat lamp is broken. C. Check if the AC connection of Heat lamp is disconnected or contaminated. D. Check if the thermostat is blown. E. Check if there is any jammed paper in fuser unit. F. Check if the power voltage is normal. (Is the voltage during the operation ±10% of the rated voltage?) 3. If the problem persists, replace the fuser unit. 4. If the problem persists after replacing the fuser unit, replace the engine board or SMPS.

Code: U1-2141

Display: Fuser Unit Failure #U1-2141. Please turn off then on.
Description: The Fuser is being diagnosed for Over Heat Error.
Remedy: 1. Turn the machine off and turn it on again. 2. Check the following : A. Check the power voltage of the fuser unit. (110V, 220V) B. Check if there is any jammed paper in fuser unit. C. Check if the power voltage is normal. (Is the voltage during the operation ±10% of the rated voltage?) 3. If the problem persists, replace the fuser unit. 4. If the problem persists after replacing the fuser unit, replace the engine board or SMPS.

Code: U2-5111, U2-5113

Display: Black LSU Unit Failure: #U2-5111. Please turn off then on. Black LSU Unit Failure: #U2-5113. Please turn off then on.
Description: Black LSU occurs Lready Error.
Remedy: 1. Turn the machine on and turn it off again. Has the error message disappeared? 2. Check if the LSU connector is connected properly. Reconnect it. 3. If the problem persists, replace the LSU.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie