Code :

Code: 33
Display: LOAD MANUAL PRESS CONTINUE
Description: Orange light Flickering When selecting the manual feeding system.
Remedy: Press the [Online/Continue] button to print a page. Press the button for each time.

Code: 34
Display: MAIN FAN MOTOR LOCK ERROR
Description: Orange light Flickering An error has occurred at the main fan.
Remedy: 1) Check the harness connected between the Engine controller and the paper size board. (If the harness is out, insert it to connector.) 2) Check the harness connected between the paper size board and the main fan. (If the harness is out, insert it to connector.) 3) In the Engine diagnostic mode, operate the main fan to check if the fan is operating. (If it is not operating, replace the main fan.) 4) Replace the paper size board. 5) Replace the Engine controller.

Code: 35
Display: MAIN MOTOR LOCK ERROR
Description: Orange light on An error has occurred at the main motor.
Remedy: 1) Check the harness connected between the Engine controller and the main motor. (If the harness is out, insert it to the connector.) 2) In the Engine diagnostic mode, operate the main motor to check if the motor is operating. (If it is not operating, replace the main motor.) 3) Check the F3 fuse of the SMPS whether it is disconnected. (If it is disconnected, replace the SMPS and check the existence of the 5V/24V/ short) 4) Replace the Engine controller.

Code: 36
Display: MEMORY OVER FLOW
Description: Orange light on Due to lack of memory, the present page cannot be treated.
Remedy: The present printing process is automatically canceled, and the printer becomes a standby state. After receiving the data, the printing process starts.

Code: 37
Display: MOTOR LSU ERROR
Description: Orange light on The LSU motor is operating abnormally.
Remedy: 1) Check the harness connected between the Engine controller and the LSU. (If the harness is out, insert it to the connector.) 2) In the Engine diagnostic mode, operate the LSU motor to check if the motor is operating. (If the LSU motor is not operating, replace the LSU unit.) 3) Replace the Engine controller.

Code: 38
Display: NVRAM CHECK FAIL
Description: Orange light on The values between NVRAM and the checksum are different.
Remedy: 1) Replace the NVRAM 2) Replace the Video controller.

Code: 39
Display: PAGE TOO COMPLEX
Description: Orange light Flickering The pages are too complex to be treated.
Remedy: When memory is downloaded and the printing is attempted once again, if it cannot be printed, this page will not be printed and the next page will be printed.

Code: 40
Display: PICKUP 1 MOTOR LOCK ERROR
Description: Orange light on The occurrence of the error at the motor of the fist Pickup unit.
Remedy: 1) Check the harness connected between the Engine controller and the TA board. (If the harness is out, insert it to the connector.) 2) Check the harness connected between the TA board and the Pickup unit. (If the harness is out, insert it to the connector.) 3) Check the harness connected between the Pickup unit and the Pickup motor. (If the harness is out, insert it to the connector.) 4) In the Engine diagnostic mode, operate the T1 Pickup motor to check if the motor is operating. (If it is not operating, replace the Pickup motor.) 5) Check the damage of the Pickup motor s encoder. (If the encoder is damaged, replace the Pickup motor.) 6) Replace the TA board.