Code :

Code: 41
Display: PICKUP 2 MOTOR LOCK ERROR
Description: Orange light on The occurrence of an error at the motor of the second Pickup unit.
Remedy: 1) Check the harness connected between the Engine controller and the TA board. (If the harness is out, insert it to the connector.) 2) Check the harness connected between the TA board and the Pickup unit. (If the harness is out, insert it to the connector.) 3) Check the harness connected between the Pickup unit and the Pickup motor. (If the harness is out, insert it to the connector.) 4) In the Engine diagnostic mode, operate the T2 Pickup motor to check if the motor is operating. (If it is not operating, replace the Pickup motor.) 5) Check the damage of the Pickup motor s encoder. (If the encoder is damaged, replace the Pickup motor.) 6) Replace the TA board.

Code: 42
Display: PICKUP 3 MOTOR LOCK ERROR
Description: Orange light on The occurrence of an error at the motor of the third Pickup unit.
Remedy: 1) Check the connecting status of the SCF cable. (If the cable is out, insert it to the connector.) 2) Check the harness connected between the SCF controller and the Pickup unit. (If the harness is out, insert it to the connector.) 3) Check the harness connected between the Pickup unit and the Pickup motor. (If the harness is out, insert it to the connector.) 4) In the Engine diagnostic mode, operate the T3 Pickup motor to check if the motor is operating. (If it is not operating, replace the Pickup motor.) 5) Check the damage of the Pickup motor s encoder. (If the encoder is damaged, replace the Pickup motor.) 6) Replace the SCF controller.

Code: 43
Display: PICKUP 4 MOTOR LOCK ERROR
Description: Orange light on The occurrence of an error at the motor of the fourth Pickup unit.
Remedy: 1) Check the connecting status of the SCF cable. (If the cable is out, insert it to the connector.) 2) Check the harness connected between the SCF controller and the Pickup unit. (If the harness is out, insert it to the connector.) 3) Check the harness connected between the Pickup unit and the Pickup motor. (If the harness is out, insert it to the connector.) 4) In the Engine diagnostic mode, operate the T4 Pickup motor to check if the motor is operating. (If it is not operating, replace the Pickup motor.) 5) Check the damage of the Pickup motor s encoder. (If the encoder is damaged, replace the Pickup motor.) 6) Replace the SCF controller.

Code: 44
Display: POWER FAN MOTOR LOCK ERROR
Description: Orange light on The occurrence of an error at the power fan.
Remedy: 1) Check the harness connected between the SMPS board and the power fan. (If the harness is out, insert it to the connector.) 2) Check the SMPS F3 to see whether it is normal. (If it is abnormal, replace the SMPS) 3) In the Engine diagnostic mode, operate the SMPS fan to check if the fan motor is operating. (If it is not operating, replace the SMPS fan.)

Code: 46
Display: READY HDD FULL
Description: Green light on The HDD Has exceeded it capacity.
Remedy: The memory of the optional hard disk is full. Delete unnecessary files from the hard disk.

Code: 47
Display: READY HDD NOT ENOUGH
Description: Green light on The maximum capacity of the optional hard disk is 500 Mbytes.
Remedy: When this message displays, you cannot use the Spool Print option. Delete unnecessary files from the hard disk. The maximum capacity of the optional hard disk is 500 Mbytes.

Code: 48
Display: READY NO FILE SYSTEM
Description: Green light on The HDD is mounted, but there is no file system or the file system error has occurred.
Remedy: An error occurred in the file system of the optional hard disk. Contact a service representative.