Code :

Code: 57
Display: READY REPLACE TRANSFER
Description: Green light on The life of the transfer unit has expired.
Remedy: The transfer unit is at the end of its life. Replace the transfer unit. Contact a service representative.

Code: 58
Display: READY [TRAY x] EMPTY
Description: Green light on There are no papers in the cassette.
Remedy: The printer is in Ready Mode, and the displayed tray is empty. Put paper in the tray. If more than one tray is empty, the display indicates in order of tray 1,2,3, and 4. Note that the printer cannot detect if the Multi-purpose tray is empty.

Code: 59
Display: REPLACE DEV. KIT
Description: Orange light on The life of the OPC Drum unit has expired.
Remedy: The toner cartridge is at the end of its life. You cannot print.Replace the cartridge.

Code: 61
Display: SLEEPING
Description: Off The power saving mode
Remedy: The power saving mode is selected. When data file is downloaded or any button is pressed, the printer goes online.

Code: 62
Display: TONER EMPTY
Description: Orange light on No more toner.
Remedy: 1) Check the life span of the toner cartridge. (If it has ended, replace it.) 2) Check the harness connected between the Engine controller and the toner empty sensor. (If the harness is out, insert it to the connector.) 3) In the Engine diagnostic mode, check the toner empty sensor. (If it is not operating, replace the toner empty sensor board.)

Code: 63
Display: TONER KIT NOT INSTALLED
Description: Orange light on The toner cartridge is not mounted.
Remedy: 1) Check the harness connected between the Engine controller and the drum cartridge. (If the harness is out, insert it to the connector.) 2) Check the harness connected between the Engine controller and the toner cartridge. (If the harness is out, insert it to the connector.) 3) In the Engine diagnostic mode, operate the toner cartridge to check if it is operating. (If it is not operating, replace the toner container unit.) 4) Replace the Engine controller.

Code: 64
Display: TONER LOW STOP PRESS CONT KEY
Description: Orange light Flickering In the event of the toner low, it is set up not to print.
Remedy: To continuously print, on-line/continue button should be pressed each time print is desired.

‹ First < 5 6 7 8 9 10 >