Description: Orange light on The HSYNC is not occurred.
Remedy: 1) Check the harness connected between the Engine controller and the LSU. (If the harness is out, insert it to the connector.) 2) In the Engine diagnostic mode, operate the LSU motor test to see if the HSYNC is created. (If the HSYNC hasn t been created, replace the LSU.) 3) Check the CN3 of the Engine controller whether it is 1.1V. (If it is not, replace the Engine controller.) 4) Replace the LSU.
Description: Orange light on A problem due to receiving data.
Remedy: 1) Turn the power off, and then on. 2) Try reprinting. 3) Inform the PC environment and the delinquent data to the [CS group appropriate Quality Control officer]
Description: Orange light on A communication is not made with the developer.
Remedy: 1) Check the harness connected to the Engine controller and the DEVE ID board. (If the harness is out, insert it to the connector.) 2) Check the drum cartridge whether it is an authentic product. (If it is not an authentic product, replace it) 3) Check the existence of the open/short of the D15 of the Engine controller. (Replace the Engine controller when it is open/short.)
Description: Orange light on The toner kit is invalided.
Remedy: 1) Check the harness connected between the Engine controller and the toner ID. (If the harness is out, insert it to the connector.) 2) Check the toner cartridge whether it is an authentic product. (If not, replace it.) 3) Check the existence of the Open/short of the D11 of the Engine controller. (Replace the Engine controller when it is open/short.)