Mã lỗi Samsung SCX4920N — Trang 3/4
Code:
Tất cả lỗi (27)
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Code:
17
Display: No. Not Assigned
Description: The speed dial location you tried to use has no number assigned to it.
Remedy: Dial the number manually using the number keypad or assign the number.
Code:
18
Display: No. Not Available
Description: You have tried to delete the number for the delayed fax job.
Remedy: Verify the number to be deleted and try again. Or Delete the number after the delayed fax job is
Code:
19
Display: [No Paper] Add Paper
Description: The paper in the paper tray has run out.
Remedy: Load paper in the paper tray.
Code:
20
Display: No Job Found
Description: You are performing an Add / Cancel operation, but there are no jobs waiting.
Remedy: Check the display to see if there are any scheduled jobs. The display should indicate if any scheduled jobs are in Standby mode, for example, Delay Fax.
Code:
21
Display: [Paper Jam 0] Open/Close Door
Description: Paper has jammed in the feeding area of the paper tray.
Remedy: Clear the jam.
Code:
22
Display: [Paper Jam 1] Check Inside
Description: Paper has jammed in the paper exit area.
Remedy: Clear the jam.
Code:
23
Display: [Paper Jam 2] Check Outside
Description: Paper has jammed in the fuser area.
Remedy: Clear the jam.
Code:
24
Display: Power Failure
Description: The power has been turned off and then on and the printer’s memory has not been saved.
Remedy: The printer’s memory was not saved due to a power failure. The job will need to be started over.