• Code: F0-20
• Description: Finisher paper alignment motor R section abnormality (FNM109)
  The operation of the rear alignment plate in the staple compiler of the finisher.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the paper alignment motor R. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-23
• Description: Shutter trouble (FNCL102)
  The operation of the shutter open/close in the paper exit section.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the shutter clutch. Check connection from the control PWB to the clutch and the sensor. Replace the control PWB, the clutch, and the sensor part.

• Code: F0-25
• Description: Finisher paper transport roller lift motor section abnormality (FNM119)
  The separation operation of the transport roller in the buffer section of the finisher or the path select operation of the flapper is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the paper transport roller lift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-28
• Description: Finisher paper alignment roller lift motor section abnormality (FNM112)
  The lifting operation of the paper takeup roller arm in the staple compiler of the finisher is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the paper alignment roller lift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-29
• Description: Finisher PWB cooling fan abnormality (FNFAN102)
  The operation of the PWB cooling fan in the finisher is abnormal.
• Causes: Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
• Remedy: Use SIM3-3 to check the operation of the control PWB cooling fan. Check connection from the control PWB to the motor. Replace the control PWB and the fan motor.

• Code: F0-30
• Description: Communication trouble between the finisher and the saddle
  Communication trouble between the finisher and the saddle No response for the command send from the saddle unit
• Causes: Noise on the communication line, control PWB trouble, disconnection of connector or harness.
• Remedy: Turn OFF/ON the power. Check the connector between the finisher and the saddle. Replace the control PWB of the saddle unit.

• Code: F0-31
• Description: Finisher saddle folding motor section abnormality (FNFAN103)
  Saddle unit folding roller operation abnormality
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the saddle paper folding motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-32
• Description: Finisher relay unit transport motor section abnormality (FNFAN104)
  The operation of the paper transport in the paper relay unit of the finisher is abnormal.
• Causes: Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
• Remedy: Use SIM3-3 to check the operation of the relay paper transport motor. Check connection from the control PWB to the motor. Turn OFF/ON the power. Replace the control PWB and the motor.