• Code: F0-33
• Description: Finisher punch shift motor section abnormality (FNM113)
  The horizontal registration shift operation of the punch unit in the finisher is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the punch shift motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-34
• Description: Finisher punch motor section abnormality (FNM117)
  The punching operation of the punch unit in the finisher is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the punch motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-37
• Description: Finisher backup RAM trouble
  Data cannot be written into the backup RAM. The red values are abnormal.
• Causes: Finisher control PWB trouble, EEPROM chip breakdown.
• Remedy: Replace the finisher control PWB.

• Code: F0-40
• Description: Communication trouble between the finisher saddle and the trimmer
  Communication trouble between the saddle unit and the trimmer unit. When a command is sent from the saddle unit to the trimmer unit, no response is made by the trimmer unit.
• Causes: Noise on the communication line, control PWB trouble, disconnection of connector or harness.
• Remedy: Turn OFF/ON the power. Check the connector between the saddle and the trimmer unit. Replace the control PWB of the saddle unit. Replace the control PWB of the trimmer unit.

• Code: F0-41
• Description: Finisher saddle lead edge stopper motor section abnormality (FSM203)
  The operation of the finisher saddle unit lead edge stopper motor is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the saddle lead edge stopper motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-42
• Description: Finisher saddle folding roller guide motor section abnormality (FSM204)
  The operation of the saddle unit folding roller guide is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the saddle folding roller guide motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-43
• Description: Finisher saddle alignment motor section abnormality (FSM212)
  The jogger shift operation in the staple compiler of the saddle unit is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the saddle paper alignment motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

• Code: F0-44
• Description: Finisher saddle rear edge hold motor section abnormality (FSM210)
  The operation of the rear edge hold member of the saddle unit is abnormal.
• Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
• Remedy: Use SIM3-3 to check the operation of the saddle rear edge hold motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.