• Code: E25
• Description: Paper fed from the external LCF (not reaching the registration sensor)
• Remedy: Is there any paper before the registration sensor when the bypass unit cover is opened? Remove the paper. Is the registration sensor working? (Perform the input check in the test mode: 03-[ENERGY SAVER]ON/[4]/[E]) 1. Check if the registration connector is not disconnected. 2. Check if the connector J341 on the LGC board is not disconnected. 3. Check if the connector pins are not disconnected and the harness is not open-circuited. 4. Check if the conductor pattern on the LGC board is not short- or opencircuited. 5. Replace the registration sensor. 6. Replace the LGC board. Is the external LCF transport motor driving? (Perform the output check in the test mode: 03-122/172) 1. Check if the connector of the transport motor is not disconnected. 2. Check if the connectors J801~804 on the LCF board are not disconnected. 3. Check if there is any abnormality at the transort drive unit. Is the external LCF feed clutch working? (Perform the output check in the test mode: 03-272) 1. Check if the external LCF clutch connector is not disconnected. 2. Check if the connectors J801~804 on the LCF board are not disconnected. 3. Check if the connector J346 on the LGC board is not disconnected. 4. Check if the connector pins are not disconnected and the harness is not open-circuited. 5. Check if the conductor pattern on the LCF and LGC boards is not short- or open-circuited. 6. Replace the external LCF feed clutch. 7. Replace the LCF board. 8. Replace the LGC board. Is the external LCF transport clutch working? (Perform the output check in the test mode: 03-273) 1. Check if the connector of the external LCF feed clutch is not disconnected. 2. Check if the connectors J801~804 on the LCF board are not disconnected. 3. Check if the connector J346 on the LGC board is not disconnected. 4. Check if the connector pins are not disconnected and the harness is not open-circuited. 5. Check if the conductor pattern on the LCF and LGC boards is not short- or open-circuited. 6. Replace the external LCF feed clutch. 7. Replace the LCF board. 8. Replace the LGC board. 1. Check if there is any abnormality at the transport drive unit. 2. Check the condition of the external LCF feed roller and separation roller and clean them, or if they are deteriorated, replace them.

• Code: E30
• Description: Paper fed from the 3rd cassette (not reaching the registration sensor)
• Remedy:

• Code: E31
• Description: Paper fed from the 3rd cassette (not reaching the 1st cassette transport sensor)
• Remedy: Open the feed cover. Is there paper in front of the 1st cassette transport sensor? YES Remove the paper. NO Is the 1st cassette transport sensor working? (Perform the input check in the test mode: 03-[ENERGY SAVER]OFF/[2]/[B]) NO 1. Check if the connector of the 1st cassette transport sensor is disconnected. 2. Check if the connector J328, 329,350 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the 1st cassette transport sensor. 6. Replace the LGC board. YES Are the transport clutches working? (Perform the output check in the test mode: 03-202, 203, 210) NO 1. Check if the connectors of the transport clutches are disconnected. 2. Check if the connector J328, 329, 350 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the transport clutches. 6. Replace the LGC board. YES Check the transport roller. Replace it if it is worn out.

• Code: E32
• Description: Paper fed from the 3rd cassette (not reaching the 2nd cassette transport sensor)
• Remedy: Open the feed cover. Is there paper in front of the 2nd cassette transport sensor? YES Remove the paper. NO Is the 2nd cassette transport sensor working? (Perform the input check in the test mode: 03-[ENERGY SAVER]OFF/[3]/[B]) NO 1. Check if the connector of the 2nd cassette transport sensor is disconnected. 2. Check if the connector J328,329,350 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the 2nd cassette transport sensor. 6. Replace the LGC board. YES Are the transport clutches working? (Perform the output check in the test mode: 03-203, 210, 226) NO 1. Check if the connectors of the transport clutches are disconnected. 2. Check if the connector J328, 329, 350 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the transport clutches. 6. Replace the LGC board. YES Check the transport roller. Replace it if it is worn out.

• Code: E33
• Description: Paper fed from the 3rd cassette (not reaching the 3rd cassette transport sensor)
• Remedy: Open the feed cover. Is there any paper in front of the 3rd cassette transport sensor? YES Remove the paper. NO Is the 3rd cassette tranport sensor working? (Perform the input check in the test mode: 03-[ENERGY SAVER]OFF/[4]/[B] NO 1. Check if the connector of the 3rd cassette transport sensor is disconnected. 2. Check if the connector J328 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor patterns on the LGC board are short- or open-circuited. 5 Replace the 3rd cassette transport sensor. 6. Replace the LGC board. YES Is the transport clutch working? (Perform the output check in the test mode: 03-225) NO 1. Check if the connector of the transport clutch is disconnected. 2. Check if the connector J328, 329, 350 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor patterns on the LGC board are short- or open-circuited. 5 Replace the transport clutch. 6 Replace the LGC board. YES Check the transport roller. Replace it if it is worn out.

• Code: E34
• Description: Paper fed from the 4th cassette (not reaching the registration sensor)
• Remedy:

• Code: E35
• Description: Paper fed from the 4th cassette (not reaching the 1st cassette transport sensor)
• Remedy: Open the feed cover. Is there paper in front of the 1st cassette transport sensor? YES Remove the paper. NO Is the 1st cassette transport sensor working? (Perform the input check in the test mode: 03-[ENERGY SAVER]OFF/[2]/[B]) NO 1. Check if the connector of the 1st cassette transport sensor is disconnected. 2. Check if the connector J328, 329,350 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the 1st cassette transport sensor. 6. Replace the LGC board. YES Are the transport clutches working? (Perform the output check in the test mode: 03-202, 203, 210) NO 1. Check if the connectors of the transport clutches are disconnected. 2. Check if the connector J328, 329, 350 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the transport clutches. 6. Replace the LGC board. YES Check the transport roller. Replace it if it is worn out.

• Code: E36
• Description: Paper fed from the 4th cassette (not reaching the 2nd cassette transport sensor)
• Remedy: