• Code: 200.11
• Display: 200.11
• Description: Input sensor does not break. Possible causes: • Incorrect media setting • Incorrect paper loading • Incorrect media restraint setting • Paper tray failure • Paper pick mechanism
• Remedy: • Ensure proper media is set for the type of paper used. • Fan media, and stack flat in the tray or MPF. • Properly set media restraints in the paper tray. • Check the pick arm rolls (tires) and replace if worn. • Replace the paper tray. • Replace the paper pick mechanism.

• Code: 200.16
• Display: 200.16
• Description: Input sensor is made when printer powers up or covers are closed. Possible causes: • Paper jam leaving page over sensor • Defective input sensor • Faulty system card
• Remedy: • Check for anything in the paper path that might cause the paper to jam.

• Code: 200.21
• Display: 200.21
• Description: Bump aligner motor stalled. Possible causes: • Faulty cable/connector • 24 V interlock switch not working correctly • Faulty bump align motor • Faulty system card
• Remedy: • Check for anything in the paper path that might cause the paper to jam.

• Code: 200.22
• Display: 200.22
• Description: Pick (tray 1) motor stalled. Possible causes: • Faulty cable/connector • Faulty pick motor • Faulty system card
• Remedy: • Check for anything in the paper path that might cause the paper to jam.

• Code: 200.25
• Display: 200.25
• Description: Input sensor is made when tray 1 is installed. Possible causes: • Improper placement of paper in tray 1 • Damaged input sensor flag or input sensor • Faulty system card
• Remedy: • Fan media, and stack flat in the tray or MPF. • Properly set media restraints in the paper tray.

• Code: 201.06
• Display: 201.06
• Description: Paper is jammed between the input sensor and the exit sensor. Possible causes: • Damaged paper exit sensor or paper exit sensor flag • Damaged fuser autoconnect • Faulty fuser DC cable connection • Faulty fuser • Faulty system card
• Remedy: • Check for anything in the paper path that might cause the paper to jam. • The fuser exit sensor may not be functioning properly.

• Code: 201.07
• Display: 201.07
• Description: Exit sensor is made early. Possible causes: • Damaged paper exit sensor or paper exit sensor flag • Damaged fuser autoconnect • Faulty fuser DC cable connection • Faulty fuser • Faulty system card
• Remedy: • Check for anything in the paper path that might cause the paper to jam. • The fuser exit sensor may not be functioning properly.

• Code: 201.08
• Display: 201.08
• Description: Exit sensor is never made. Possible causes: • Improper loading of manual feed slot • Paper wrapped in fuser • Damaged paper exit sensor or paper exit sensor flag • Damaged fuser autoconnect • Faulty fuser DC cable connection • Faulty fuser • Faulty system card
• Remedy: • Check for anything in the paper path that might cause the paper to jam. • Load paper in the manual feed slot. • The fuser exit sensor may not be functioning properly.