Code :

Code: 202.21
Display: 202.21
Description: Fuser motor stalled. Possible causes: • Faulty cable/connector • Faulty fuser motor • Faulty system card
Remedy: • Check for anything in the paper path that might cause the paper to jam.

Code: 203.09
Display: 203.09
Description: During duplex printing retract, the exit sensor is never made. Possible causes: • Damaged paper exit sensor or paper exit sensor flag • Damaged fuser autoconnect • Faulty fuser DC cable connection • Faulty fuser • Faulty system card
Remedy: • Check for anything in the paper path that might cause the paper to jam. • The fuser exit sensor may not be functioning properly.

Code: 203.14
Display: 203.14
Description: During duplex printing retract, the exit sensor broke early. Possible causes: • Damaged paper exit sensor or paper exit sensor flag • Faulty fuser • Faulty system card
Remedy: The fuser exit sensor may not be functioning properly.

Code: 203.15
Display: 203.15
Description: During duplex printing, the exit sensor never broke. Possible causes: • Damaged paper exit sensor or paper exit sensor flag • Obstructed duplex • Faulty fuser • Faulty system card
Remedy: • Check the duplex paper path for damage that would obstruct the print. If damage is found, replace the duplex front door assembly. • The fuser exit sensor may not be functioning properly.

Code: 230.03
Display: 230.03
Description: During duplex printing, the input sensor is never made. Possible causes: • Obstructed duplex path • Defective input sensor • Faulty system card • Faulty duplex drive
Remedy: • Check for anything in the duplex paper path that might cause the paper to jam. This includes the paper guides in tray 1. • If clearing the paper jam does not fix the problem and the paper is fan-folded, replace the front access assembly.

Code: 230.04
Display: 230.04
Description: During duplex printing, the input sensor is made while the previous page is still in the aligner. Possible causes: • Defective input sensor • Faulty system card
Remedy:

Code: 230.05
Display: 230.05
Description: During duplex printing, the input sensor is not made. Possible causes: • Obstructed duplex path • Defective input sensor • Faulty system card • Faulty duplex drive
Remedy: • Check for anything in the duplex paper path that might cause the paper to jam. This includes the paper guides in tray 1. • If clearing the paper jam does not fix the problem and the paper is fan-folded, replace the front access assembly.

Code: 230.21
Display: 230.21
Description: Duplex motor stalled. Possible causes: • Obstructed duplex path • Defective duplex motor • Faulty system card
Remedy: • Check for anything in the duplex paper path that might cause the paper to jam. This includes the paper guides in tray 1.