Code :

Code: E062
Description: Incorrect paper size setting for the 2nd drawer jam
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E063
Description: Incorrect paper size setting for the PFP upper drawer jam
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E064
Description: Incorrect paper size setting for the PFP lower drawer.
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E065
Description: Incorrect paper size setting for the bypass tray jam
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E090
Description: Image data delay jam
Causes: SYS board LGC board HDD Main memory
Remedy: Other • Remove the paper remained in front of the registration sensor) • Check if the error is cleared by turning the power OFF and then back ON. SYS board • Connector check • Main memory check • Board check LGC board • Connector check • Board check HDD • Connector check • HDD check

Code: E091
Description: Motor-ON time-out jam
Causes: SYS board LGC board HDD
Remedy: Other • Check if there is any paper in the equipment. Remove it if there is. • If the error still occurs, check the following. Power Check if the error is cleared by turning the power OFF and then back ON. SYS board • Connector check • Board check LGC board • Connector check • Board check HDD • Connector check • HDD check

Code: E110
Description: Paper misfeeding in the ADU (paper not reaching the registration sensor)
Causes: Registration sensor PFC board LGC board Rollers in the ADU
Remedy: Paper stop jam at the registration roller position Registration guide Check the registration guide. Replace it if needed. All Registration sensor • Sensor check (Perform the input check: FS-03- [ALL]OFF/[9]/[A]) • Connector check (J660, J659) • Harness check PFC board • Board check • Connector check (CN450, CN452, CN458) • Harness check LGC board • Board check • Connector check (CN323) • Harness check ADU Check if the connector between the ADU and equipment is connected.