• Code: SC764
• Description: Paper position sensor slide motor error. Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Remedy: • Motor harness disconnected, loose, defective • Motor defective

• Code: SC765
• Description: Folding unit bottom fence lift motor. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Remedy: • Motor harness disconnected, loose, defective • Motor defective

• Code: SC766
• Description: Clamp roller retraction motor error. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Remedy: • Motor harness disconnected, loose, defective • Motor defective

• Code: SC767
• Description: Stack junction gate motor error. Occurs during operation of the punch unit. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Remedy: • Motor harness disconnected, loose, defective • Motor overload • Motor defective

• Code: SC770
• Description: Cover interposer tray bottom plate motor error. • After the motor starts to raise the bottom plate, the bottom plate position sensor does not detect the plate at the specified time (3 s). • After the motor starts to lower the bottom plate, the bottom plate HP sensor does not detect the bottom plate.
• Remedy: • Bottom plate position sensor, disconnected, defective • Bottom plate HP sensor disconnected, defective

• Code: SC775
• Description: Cover interposer tray feed motor
• Remedy: • Motor harness disconnected, loose, defective • Motor overload • Motor defective

• Code: SC780
• Description: Z-Fold feed motor error Japan Only. The feed motor does not attain the prescribed speed within the specified time.
• Remedy: • Feed motor disconnected, defective • Feed motor overloaded due to obstruction • Feed motor lock

• Code: SC781
• Description: Z-Fold lower stopper motor Japan Only. The lower stopper motor does not attain the prescribed speed within the specified time.
• Remedy: • Lower stopper motor disconnected, defective • Lower stopper motor overloaded due to obstruction • Lower stopper HP sensor disconnected, defective