Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 4500c — Trang 28/34

Code: SC782

Description: Z-Fold upper stopper motor Japan Only. The upper stopper motor does not attain the prescribed speed within the specified time.
Remedy: • Upper stopper motor disconnected, defective • Upper stopper motor overloaded due to obstruction • Upper stopper HP sensor disconnected, defective

Code: SC790

Description: Finisher staple waste hopper full. The staple waste hopper is full of cut staples.
Remedy: • If the hopper is full, empty the hopper • If the hopper is not full, the hopper full sensor is disconnected, defective

Code: SC817

Description: Boot loader error. The boot loader cannot read one of the following: self-diagnostic module, kernel, or one of the files of the root file system, or the check of one of these items on the system SD card failed.
Remedy: • File or module on the system SD card is corrupted • File or module on the system SD card is illegal • Make sure that the system SD card is the one designed for the machine • Replace system ROM on the controller board

Code: SC818

Description: Watchdog error. While the system program is running, a bus hold or interrupt program goes into an endless loop, preventing any other programs from executing.
Remedy: • System program defective; switch OFF/ON, or change the controller firmware if the problem cannot be solved • Controller board defective • Controller option malfunction

Code: SC819

Description: Fatal kernel error. Due to a control error, a RAM overflow occurred during system processing. One of the following messages was dis
Remedy: • System program defective • Controller board defective • Optional board defective • Replace controller firmware
0x696e init died 0x766d vm_pageout: Virtual Memory is full 4361 Cache Error NOTE: For more details about this SC code error, execute SP5990 to print an SMC report so you can read the error code. The error code is not displayed on the operation panel.

Code: SC821-0B00

Description: Self-diagnostic error 2: ASIC
Error code 0xffff ffff is returned when the register Write & Verify check is executed on the ASIC mounted on the controller board. The ASIC controls the ROM and buses for other devices
Remedy: • ASIC (controller board defective) NOTE: For more details about this SC code error, execute SP5990 to print an SMC report so you can read the error code. The error code is not displayed on the operation panel

Code: SC821-0B06

Description: Self-diagnostic error 2: ASIC
ASIC not detected
Remedy: • ASIC (controller board defective) • Poor connection between North Bridge and PCI I/F: Replace controller board NOTE: For more details about this SC code error, execute SP5990 to print an SMC report so you can read the error code. The error code is not displayed on the operation panel

Code: SC821-0B10

Description: Self-diagnostic error 2: ASIC
Failed to initialize or could not read connection bus. Data in SHM register incorrect.
Remedy: • Replace controller board NOTE: For more details about this SC code error, execute SP5990 to print an SMC report so you can read the error code. The error code is not displayed on the operation panel
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie