Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 4505AC — Trang 15/29

Code: E062

Description: Incorrect paper size setting for the 2nd drawer jam
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E063

Description: Incorrect paper size setting for the PFP upper drawer jam
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E064

Description: Incorrect paper size setting for the PFP lower drawer.
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E065

Description: Incorrect paper size setting for the bypass tray jam
Causes:
Remedy: If any paper remains in the equipment or drawer, remove it. Match the paper size of the drawer setting and the one in the drawer. * Paper size detection is performed at the first sheet of paper when the drawer is opened or closed, or when the power of the equipment is turned ON.

Code: E090

Description: Image data delay jam
Causes: SYS board LGC board HDD Main memory
Remedy: Other • Remove the paper remained in front of the registration sensor) • Check if the error is cleared by turning the power OFF and then back ON. SYS board • Connector check • Main memory check • Board check LGC board • Connector check • Board check HDD • Connector check • HDD check

Code: E091

Description: Motor-ON time-out jam
Causes: SYS board LGC board HDD
Remedy: Other • Check if there is any paper in the equipment. Remove it if there is. • If the error still occurs, check the following. Power Check if the error is cleared by turning the power OFF and then back ON. SYS board • Connector check • Board check LGC board • Connector check • Board check HDD • Connector check • HDD check

Code: E0A0

Description: Image transport ready time-out jam
Causes: LGC board
Remedy: LGC board • Connector check • Harness check (SYS board - LGC board)

Code: E110

Description: Paper misfeeding in the ADU (paper not reaching the registration sensor)
Causes: Registration sensor PFC board LGC board Rollers in the ADU
Remedy: Paper stop jam at the registration roller position Registration guide Check the registration guide. Replace it if needed. All Registration sensor • Sensor check (Perform the input check: FS-03- [ALL]OFF/[9]/[A]) • Connector check (J660, J659) • Harness check PFC board • Board check • Connector check (CN450, CN452, CN458) • Harness check LGC board • Board check • Connector check (CN323) • Harness check ADU Check if the connector between the ADU and equipment is connected.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie