0

Các lỗi thường gặp

Code :
  • Code: E120
  • Description: Paper misfeeding in the bypass tray (paper not reaching the bypass feed sensor)
  • Causes: Bypass feed clutch Feed sensor PFC board LGC board Bypass feed roller Replace it if it is worn out. Bypass separation roller Replace it if it is worn out.
  • Remedy: Bypass feed clutch • Clutch check (Perform the output check: FS-03-204) • Connector check (J696, J693, CN451) • Harness check Feed sensor • Sensor check (Perform the input check: FS-03-[ALL]OFF/[9]/[B]) • Connector check (J661, J659, CN458) • Harness check PFC board • Board check • Connector check (CN458, CN451, CN452) • Harness check LGC board • Board check • Connector check (CN323, CN451) • Harness check
  • Code: E130
  • Description: Paper misfeeding in the 1st drawer (paper not reaching the 1st drawer feed sensor):
  • Causes: Feed sensor PFC board LGC board 1st drawer feed clutch 1st drawer feed roller Replace it if it is worn out. 1st drawer separation roller Replace it if it is worn out. 1st drawer pickup roller Replace it if it is worn out.
  • Remedy: Feed sensor • Sensor check (Perform the input check: FS-03-[ALL]OFF/[9]/[B]) • Connector check (J661, J659, CN458) • Harness check 1st drawer feed clutch • Clutch check (Perform the output check: FS-03-201) • Connector check (J666, CN461) • Harness check PFC board • Board check • Connector check (CN458, CN452, CN461) • Harness check LGC board • Board check • Connector check (CN323) • Harness check
  • Code: E140
  • Description: Paper misfeeding in the 2nd drawer (paper not reaching the 2nd drawer feed sensor)
  • Causes: 2nd drawer feed sensor PFC board LGC board 2nd drawer feed clutch 2nd drawer feed roller Replace it if it is worn out. 2nd drawer separation roller Replace it if it is worn out. 2nd drawer pickup roller Replace it if it is worn out.
  • Remedy: 2nd drawer feed sensor • Sensor check (Perform the input check: FS-03-[F3]ON/[4]/[D]) • Connector check (J688, J686, CN455) • Harness check 2nd drawer feed clutch • Clutch check (Perform the output check: FS-03-202) • Harness check • Connector check (J676, CN461) PFC board • Board check • Connector check (CN455, CN461, CN458, CN452) • Harness check LGC board • Board check • Connector check (CN323) • Harness check
  • Code: E150
  • Description: Paper misfeeding in the PFP upper drawer (paper not reaching the PFP upper drawer feed sensor)
  • Causes: PFP upper drawer feed sensor PFP upper drawer feed clutch LGC board PFC board PFP board PFP upper drawer feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out.
  • Remedy: PFP upper drawer feed sensor • Sensor check (Perform the input check: FS-03-[F3]ON/[0]/[C]) • Connector check (CN247, J959, J975) • Harness check PFP upper drawer feed clutch • Clutch check (Perform the output check: FS-03-226) • Connector check (CN246, J960, J963) • Harness check LGC board • Board check • Connector check (CN323, J700) • Harness check PFC board • Board check • Connector check (CN459, CN464, CN455, J700) • Harness check PFP board • Board check • Connector check (J959, CN241, CN246, CN247) • Harness check
  • Code: E160
  • Description: Paper misfeeding in the PFP lower drawer (paper not reaching the PFP lower drawer feed sensor)
  • Causes: PFP lower drawer feed sensor PFP lower drawer feed clutch LGC board PFC board PFP board PFP lower drawer feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out.
  • Remedy: PFP upper drawer feed sensor • Sensor check (Perform the input check: FS-03-[F3]ON/[0]/[D]) • Connector check (CN247, J959, J976) • Harness check PFP upper drawer feed clutch • Clutch check (Perform the output check: FS-03-228) • Connector check (CN246, J960, J962) • Harness check LGC board • Board check • Connector check (CN323, J700) • Harness check PFC board • Board check • Connector check (CN459, CN464, CN455, J700) • Harness check PFP board • Board check • Connector check (J959, CN241, CN246, CN247) • Harness check
  • Code: E190
  • Description: Paper misfeeding in the LCF (paper not reaching the LCF transport sensor)
  • Causes: LCF transport sensor LCF feed clutch PFC board PFC board LCF board LCF feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out.
  • Remedy: LCF transport sensor • Sensor check (Perform the input check: FS-03-[F1]ON/[9]/[F]) • Connector check (CN1, CN6, CN349) • Harness check LCF feed clutch • Clutch check (Perform the output check: 03-209) • Connector check (CN1, CN6, CN349) • Harness check LGC board • Board check • Connector check (CN323, J700) • Harness check PFC board • Board check • Connector check (CN459, CN464, CN455, J700) • Harness check LCF board • Board check • Connector check (CN1, CN6) • Harness check
  • Code: E200
  • Description: Paper transport jam in the 1st drawer (paper not reaching the registration sensor)
  • Causes: Registration sensor 1st drawer feed clutch 2nd drawer feed clutch Bypass feed clutch Transport clutch (H)/(L) PFC board LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
  • Remedy: Registration sensor • Sensor check (Perform the input check: FS-03-[ALL]OFF/[9]/[A]) • Connector check (CN458, J659, J660) • Harness check 1st drawer feed clutch • Clutch check (Perform the output check: FS-03-201) • Connector check (CN461, J666) • Harness check 2nd drawer feed clutch • Clutch check (Perform the output check: FS-03-202) • Connector check (CN461, J676) • Harness check Bypass feed clutch • Clutch check (Perform the output check: FS-03-204) • Connector check (CN451, J696, J693) • Harness check Transport clutch (H) • Clutch check (Perform the output check: FS-03-230) • Connector check (CN461, J664) • Harness check Transport clutch (L) • Clutch check (Perform the output check: FS-03-233) • Connector check (CN461, J665) • Harness check PFC board • Board check • Connector check (CN458, CN461, CN451, CN452) • Harness check LGC board • Board check • Connector check (CN323) • Harness check
  • Code: E210
  • Description: Paper transport jam in the 2nd drawer (paper not reaching the registration sensor)
  • Causes: Registration sensor 1st drawer feed clutch 2nd drawer feed clutch Bypass feed clutch Transport clutch (H)/(L) PFC board LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
  • Remedy: Registration sensor • Sensor check (Perform the input check: FS-03-[ALL]OFF/[9]/[A]) • Connector check (CN458, J659, J660) • Harness check 1st drawer feed clutch • Clutch check (Perform the output check: FS-03-201) • Connector check (CN461, J666) • Harness check 2nd drawer feed clutch • Clutch check (Perform the output check: FS-03-202) • Connector check (CN461, J676) • Harness check Bypass feed clutch • Clutch check (Perform the output check: FS-03-204) • Connector check (CN451, J696, J693) • Harness check Transport clutch (H) • Clutch check (Perform the output check: FS-03-230) • Connector check (CN461, J664) • Harness check Transport clutch (L) • Clutch check (Perform the output check: FS-03-233) • Connector check (CN461, J665) • Harness check PFC board • Board check • Connector check (CN458, CN461, CN451, CN452) • Harness check LGC board • Board check • Connector check (CN323) • Harness check
‹ First  < 13 14 15 16 17 18 19 >  Last ›
Thêm vào giỏ hàng thành công
popup

Số lượng:

Tổng tiền:

Danh mục