• Code: E360
• Description: Paper transport jam in the PFP lower drawer (paper not reaching the PFP upper drawer feed sensor)
• Causes: PFP lower drawer feed sensor PFP transport clutches LGC board PFC board PFP board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. PFP transport roller Replace it if it is worn out.
• Remedy: PFP upper drawer feed sensor • Sensor check (Perform the input check: FS-03-[F3]ON/[0]/[C]) • Connector check (CN247, J959, J975) • Harness check PFP transport clutch • Clutch check (Perform the output check: 03-225) • Connector check (CN241, CN247, J957) • Harness check LGC board • Board check • Connector check (CN323) • Harness check PFC board • Board check • Connector check (CN459, CN455, J700) • Harness check PFP board • Board check • Connector check (CN241, CN247) • Harness check

• Code: E3C0
• Description: Paper transport jam in the LCF (paper not reaching the registration sensor)
• Causes: Registration sensor 1st drawer feed clutch 2nd drawer feed clutch Bypass feed clutch Transport clutch (H)/(L) PFC board LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: Registration sensor • Sensor check (Perform the input check: FS-03-[ALL]OFF/[9]/[A]) • Connector check (CN458, J659, J660) • Harness check 1st drawer feed clutch • Clutch check (Perform the output check: FS-03-201) • Connector check (CN461, J666) • Harness check 2nd drawer feed clutch • Clutch check (Perform the output check: FS-03-202) • Connector check (CN461, J676) • Harness check Bypass feed clutch • Clutch check (Perform the output check: FS-03-204) • Connector check (CN451, J696, J693) • Harness check Transport clutch (H) • Clutch check (Perform the output check: FS-03-230) • Connector check (CN461, J664) • Harness check Transport clutch (L) • Clutch check (Perform the output check: FS-03-233) • Connector check (CN461, J665) • Harness check PFC board • Board check • Connector check (CN458, CN461, CN451, CN452) • Harness check LGC board • Board check • Connector check (CN323) • Harness check

• Code: E3D0
• Description: Paper transport jam in the LCF (paper not reaching the 1st drawer feed sensor)
• Causes: 1st drawer feed sensor Transport clutches (high speed) Transport clutches (low speed) PFC board LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: Bypass paper guide • Check if the bypass paper guide is warped. • Reassemble the bypass separation roller holder since it is possibly disengaged. Feed sensor • Sensor check (Perform the input check: FS-03-[ALL]OFF/[9]/[B]) • Connector check (CN458, J659, J661) • Harness check Transport clutches (high speed) • Clutch check (Perform the output check: FS-03-230) • Connector check (CN461, J664) • Harness check Transport clutches (low speed) • Clutch check (Perform the output check: FS-03-233) • Connector check (CN461, J665) • Harness check PFC board • Board check • Connector check (CN461, CN452, CN458) • Harness check LGC board • Board check • Connector check (CN323) • Harness check

• Code: E3E0
• Description: Paper transport jam in the LCF (paper not reaching the 2nd drawer feed sensor)
• Causes: 2nd drawer feed sensor PFC board LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: 2nd drawer feed sensor • Sensor check (Perform the input check: FS-03-[F3]ON/[4]/[D]) • Connector check (CN455, J686, J688) • Harness check PFC board • Board check • Connector check (CN459, CN455, J700) • Harness check LGC board • Board check • Connector check (CN323) • Harness check

• Code: E410
• Description: Front cover open jam
• Causes: Switching regulator LGC board High-voltage transformer Front cover switch
• Remedy: Switching regulator • Is the voltage of 24V being supplied from the power supply unit? (Perform the input check: FS-03-[ALL]OFF[7]/[D]) • Connector check (CN512) • Fuse check (F201, F202, F203) High-voltage transformer • Check if the high-voltage transformer (HVT) is installed properly. • Board check • Connector check • Harness check LGC board • Board check • Connector check (CN314, CN320, CN321, CN310) • Harness check Front cover switch • Switch check (Perform the input check: FS-03-[ALL]OFF/[7]/[C]) • Connector check (CN310, J613, J713) • Harness check

• Code: E420
• Description: PFP side cover open jam
• Causes: PFP side cover opening/ closing switch PFP board PFC board LGC board
• Remedy: closing switch • Is the PFP side cover opening/closing switch working? (Perform the input check: FS-03-[F3]ON/[0]/[A]) • Connector check (CN247, J959, J974) • Harness check PFP board • Board check • Connector check (CN241, CN247) • Harness check PFC board • Board check • Connector check (CN459, CN452, J700) • Harness check LGC board • Board check • Connector check (CN323) • Harness check

• Code: E430
• Description: ADU open jam
• Causes: Side cover switch LGC board
• Remedy: Side cover switch • Is the switch working? (Perform the input check: FS-03-[ALL]OFF[7]/[A]) • Connector check (CN307, J606) • Harness check LGC board • Board check • Connector check (CN307) • Harness check

• Code: E440
• Description: Jam access cover open jam
• Causes: Jam access cover opening/ closing switch PFC board LGC board
• Remedy: Jam access cover opening/ closing switch • Is the jam access cover opening/closing switch working? (Perform the input check: FS-03-[F3]ON/[4]/[A]) • Connector check (CN455, J686, J687) • Harness check PFC board • Board check • Connector check (CN455, CN452) • Harness check LGC board • Board check • Connector check (CN323) • Harness check