• Code: E220
• Description: Paper transport jam in the 2nd drawer (paper not reaching the 1st drawer feed sensor)
• Causes: 1st drawer feed sensor Transport clutches (high speed) Transport clutches (low speed) PFC board LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: Bypass paper guide • Check if the bypass paper guide is warped. • Reassemble the bypass separation roller holder since it is possibly disengaged. Feed sensor • Sensor check (Perform the input check: FS-03-[ALL]OFF/[9]/[B]) • Connector check (CN458, J659, J661) • Harness check Transport clutches (high speed) • Clutch check (Perform the output check: FS-03-230) • Connector check (CN461, J664) • Harness check Transport clutches (low speed) • Clutch check (Perform the output check: FS-03-233) • Connector check (CN461, J665) • Harness check PFC board • Board check • Connector check (CN461, CN452, CN458) • Harness check LGC board • Board check • Connector check (CN323) • Harness check

• Code: E270
• Description: Paper transport jam in the bypass tray (paper not reaching the registration sensor)
• Causes: Registration sensor 1st drawer feed clutch 2nd drawer feed clutch Bypass feed clutch Transport clutch (H)/(L) PFC board LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: Registration sensor • Sensor check (Perform the input check: FS-03-[ALL]OFF/[9]/[A]) • Connector check (CN458, J659, J660) • Harness check 1st drawer feed clutch • Clutch check (Perform the output check: FS-03-201) • Connector check (CN461, J666) • Harness check 2nd drawer feed clutch • Clutch check (Perform the output check: FS-03-202) • Connector check (CN461, J676) • Harness check Bypass feed clutch • Clutch check (Perform the output check: FS-03-204) • Connector check (CN451, J696, J693) • Harness check Transport clutch (H) • Clutch check (Perform the output check: FS-03-230) • Connector check (CN461, J664) • Harness check Transport clutch (L) • Clutch check (Perform the output check: FS-03-233) • Connector check (CN461, J665) • Harness check PFC board • Board check • Connector check (CN458, CN461, CN451, CN452) • Harness check LGC board • Board check • Connector check (CN323) • Harness check

• Code: E300
• Description: Paper transport jam in the PFP upper drawer (paper not reaching the registration sensor)
• Causes: Registration sensor 1st drawer feed clutch 2nd drawer feed clutch Bypass feed clutch Transport clutch (H)/(L) PFC board LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: Registration sensor • Sensor check (Perform the input check: FS-03-[ALL]OFF/[9]/[A]) • Connector check (CN458, J659, J660) • Harness check 1st drawer feed clutch • Clutch check (Perform the output check: FS-03-201) • Connector check (CN461, J666) • Harness check 2nd drawer feed clutch • Clutch check (Perform the output check: FS-03-202) • Connector check (CN461, J676) • Harness check Bypass feed clutch • Clutch check (Perform the output check: FS-03-204) • Connector check (CN451, J696, J693) • Harness check Transport clutch (H) • Clutch check (Perform the output check: FS-03-230) • Connector check (CN461, J664) • Harness check Transport clutch (L) • Clutch check (Perform the output check: FS-03-233) • Connector check (CN461, J665) • Harness check PFC board • Board check • Connector check (CN458, CN461, CN451, CN452) • Harness check LGC board • Board check • Connector check (CN323) • Harness check

• Code: E310
• Description: Paper transport jam in the PFP upper drawer (paper not reaching the 1st drawer feed sensor)
• Causes: 1st drawer feed sensor Transport clutches (high speed) Transport clutches (low speed) PFC board LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: Bypass paper guide • Check if the bypass paper guide is warped. • Reassemble the bypass separation roller holder since it is possibly disengaged. Feed sensor • Sensor check (Perform the input check: FS-03-[ALL]OFF/[9]/[B]) • Connector check (CN458, J659, J661) • Harness check Transport clutches (high speed) • Clutch check (Perform the output check: FS-03-230) • Connector check (CN461, J664) • Harness check Transport clutches (low speed) • Clutch check (Perform the output check: FS-03-233) • Connector check (CN461, J665) • Harness check PFC board • Board check • Connector check (CN461, CN452, CN458) • Harness check LGC board • Board check • Connector check (CN323) • Harness check

• Code: E320
• Description: Paper transport jam in the PFP upper drawer (paper not reaching the 2nd drawer feed sensor)
• Causes: 2nd drawer feed sensor PFC board LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: 2nd drawer feed sensor • Sensor check (Perform the input check: FS-03-[F3]ON/[4]/[D]) • Connector check (CN455, J686, J688) • Harness check PFC board • Board check • Connector check (CN459, CN455, J700) • Harness check LGC board • Board check • Connector check (CN323) • Harness check

• Code: E330
• Description: Paper transport jam in the PFP lower drawer (paper not reaching the registration sensor)
• Causes: Registration sensor 1st drawer feed clutch 2nd drawer feed clutch Bypass feed clutch Transport clutch (H)/(L) PFC board LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: Registration sensor • Sensor check (Perform the input check: FS-03-[ALL]OFF/[9]/[A]) • Connector check (CN458, J659, J660) • Harness check 1st drawer feed clutch • Clutch check (Perform the output check: FS-03-201) • Connector check (CN461, J666) • Harness check 2nd drawer feed clutch • Clutch check (Perform the output check: FS-03-202) • Connector check (CN461, J676) • Harness check Bypass feed clutch • Clutch check (Perform the output check: FS-03-204) • Connector check (CN451, J696, J693) • Harness check Transport clutch (H) • Clutch check (Perform the output check: FS-03-230) • Connector check (CN461, J664) • Harness check Transport clutch (L) • Clutch check (Perform the output check: FS-03-233) • Connector check (CN461, J665) • Harness check PFC board • Board check • Connector check (CN458, CN461, CN451, CN452) • Harness check LGC board • Board check • Connector check (CN323) • Harness check

• Code: E340
• Description: Paper transport jam in the PFP lower drawer (paper not reaching the 1st drawer feed sensor)
• Causes: 1st drawer feed sensor Transport clutches (high speed) Transport clutches (low speed) PFC board LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: Bypass paper guide • Check if the bypass paper guide is warped. • Reassemble the bypass separation roller holder since it is possibly disengaged. Feed sensor • Sensor check (Perform the input check: FS-03-[ALL]OFF/[9]/[B]) • Connector check (CN458, J659, J661) • Harness check Transport clutches (high speed) • Clutch check (Perform the output check: FS-03-230) • Connector check (CN461, J664) • Harness check Transport clutches (low speed) • Clutch check (Perform the output check: FS-03-233) • Connector check (CN461, J665) • Harness check PFC board • Board check • Connector check (CN461, CN452, CN458) • Harness check LGC board • Board check • Connector check (CN323) • Harness check

• Code: E350
• Description: Paper transport jam in the PFP lower drawer (paper not reaching the 2nd drawer feed sensor)
• Causes: 2nd drawer feed sensor PFC board LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
• Remedy: 2nd drawer feed sensor • Sensor check (Perform the input check: FS-03-[F3]ON/[4]/[D]) • Connector check (CN455, J686, J688) • Harness check PFC board • Board check • Connector check (CN459, CN455, J700) • Harness check LGC board • Board check • Connector check (CN323) • Harness check