Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 450S — Trang 5/24

Code: 920.22

Description: Hot roll fell too far below the desired temperature while printing. Fuser page count between 200,000 and 299,999.
Causes: • Bad thermistor, circuit, or cabling. • Noisy thermistor signal. • Fuser not receiving AC power. • Poor supply line voltage. • Low voltage or incorrect lamp. • Incorrect hot roll.
Remedy: See 920.xx

Code: 920.23

Description: Hot roll too cool while checking for slope change. Fuser page count between 200,000 and 299,999.
Causes: • Bad thermistor, circuit, or cabling. • Noisy thermistor signal. • Fuser not receiving AC power. • Poor supply line voltage. • Low voltage or incorrect lamp. • Incorrect hot roll.
Remedy: See 920.xx

Code: 920.24

Description: Hot roll too cool when heating to desired temperature after slope change. Fuser page count between 200,000 and 299,999.
Causes: • Bad thermistor, circuit, or cabling. • Noisy thermistor signal. • Fuser not receiving AC power. • Poor supply line voltage. • Low voltage or incorrect lamp. • Incorrect hot roll.
Remedy: See 920.xx

Code: 920.26

Description: Fuser is not increasing in temperature even though the lamp has been on for an extended tim. Fuser page count between 200,000 and 299,999.
Causes: • Fuser is not receiving AC power. • Poor supply line voltage.
Remedy: See 920.xx

Code: 920.27

Description: Fuser has been below the desired temperature for too long while media is in the nip. Fuser page count between 200,000 and 299,999.
Causes: • Bad thermistor, circuit, or cabling. • Very noisy thermistor signal. • Fuser not receiving AC power. • Poor supply line voltage. • Excessive load on the fuser. • Low voltage or incorrect lamp. • Incorrect hot roll. • Abrupt change in temperature that has disrupted control.
Remedy: See 920.xx

Code: 920.31

Description: Under temperature during steady state control. Fuser page count between 300,000 and 399,999.
Causes: • Bad thermistor, circuit, or cabling. • Fuser not receiving AC power. • Poor supply line voltage. • Low voltage or incorrect lamp. • Incorrect hot roll.
Remedy: See 920.xx

Code: 920.32

Description: Hot roll fell too far below desired temperature while printing. Fuser page count between 300,000 and 399,999.
Causes: • Bad thermistor, circuit, or cabling. • Noisy thermistor signal. • Fuser not receiving AC power. • Poor supply line voltage. • Low voltage or incorrect lamp. • Incorrect hot roll.
Remedy: See 920.xx

Code: 920.33

Description: Hot roll too cool while checking for slope change. Fuser page count between 300,000 and 399,999.
Causes: • Bad thermistor, circuit, or cabling. • Noisy thermistor signal. • Fuser not receiving AC power. • Poor supply line voltage. • Low voltage or incorrect lamp. • Incorrect hot roll.
Remedy: See 920.xx
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie