Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 477S — Trang 8/15

Code: D3F2

Description: Occur:Printing 500 page, after the drum counter is over the life limit, and detect toner empty.
Causes:
Remedy: Push the SW when change the new Image Drum and Cover open close.

Code: D3F4

Description: Occur:The drum counter is over the life limit, and detect toner empty.
Causes:
Remedy: Auto reset when change the new drum.

Code: D3F5

Description: Occur:Printing 500 page, after the drum counter is over the life limit, and detect toner empty.
Causes:
Remedy: Auto reset when change the new drum.

Code: D3F6

Description: The error is detect the Drum is not genuine. It is occur the Self-diagnostic mode of genuine isu warningv orustopv.
Causes:
Remedy: Set the correct tag in ID.

Code: E010, E020, E570

Description: Indicates that jam has occurred in the paper path. Error E010 : Transport Error E020 : Exit Error E570 : Duplex Entry
Causes:
Remedy: Take out the jammed paper.

Code: E01A

Description: Occur jam and Paper on the Transport Path
Causes:
Remedy: Take out the jammed paper. Change the sensor Lever. Change the PU board.

Code: E01B

Description: Occur jam around Fuser Unit
Causes:
Remedy: Take out the jammed paper. Change the sensor Lever. Change the PU board.

Code: E02A

Description: Occur jam and Paper on the Exit Path
Causes:
Remedy: Take out the jammed paper. Change the sensor Lever. Change the PU board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie