• Code: C5B5
• Description: When LCF is setting, Tray2 Clock Adjust Error or Tray3 Clock Adjust Error is report from PU. Interchange the error to LCF Clock Adjust Error by CU.
• Causes:
• Remedy: Replace the Tray board

• Code: C91E
• Description: When separate toner is setting, occur the error in case the ID and TC is same Tag.
• Causes: Set the correct tag in ID and TC.
• Remedy:

• Code: C91F
• Description: Detect to receive the each color. Change the ERR04
• Causes:
• Remedy: Set the correct tag in ID and TC.

• Code: C921
• Description: AC voltage zero-crossing error
• Causes:
• Remedy: C h e ck t h e AC voltage. Change the Lowvoltage board or PU board.

• Code: C940
• Description: Engine control logic has an error.
• Causes: Does this error recur?
• Remedy: Yes Turn off the power of the printer and back on. Replace the PU board

• Code: C96A
• Description: High voltage power supply interface error.
• Causes: Is the cable connecting the PU board to the high voltage unit connected normally? Have you checked defective contact of contactor points?
• Remedy: Re-connect them normally. Check for defective contact of the high voltage system. Replace the high voltage power supply.

• Code: C9A0
• Description: Offline stapler error
• Causes:
• Remedy: Change the offline stapler

• Code: CE50
• Description: Environment temperature is abnormal.
• Causes: Does this error recur?
• Remedy: Yes Turn off the power of the printer and back on. Replace the Board 8TH.